The AWEA LG-6040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 4000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-6040: 6,000 x 4,000 x 1,000 mm gantry type 5-face machining center, 6,000 x 3,800 mm fixed table, rack and pinion X, 4,800 mm between columns.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 4,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 6,000 x 3,800 mm (236.2 x 149.6 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 4,000 mm (157.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 6,000 x 3,800 mm (236.2 x 149.6 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 4,800 mm (4,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.035 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.026 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.025 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,600 liter |
According to secondary market equipment benchmarks for November 2026, the AWEA LG-6040 is estimated between $157,500 and $314,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,441 / month.
In width and what follows from it. Y travel is 3,000 mm (118.1 in) on the LG-6030, 4,000 mm (157.5 in) on the LG-6040 and 5,000 mm (196.9 in) on the LG-6050. The LG-6030 has a 1,300 liter coolant tank and P = 0.025 mm positioning on Y and Z; the LG-6050 has 1,900 liter and P = 0.040 mm. This model sits between them at 1,600 liter and P = 0.030 mm. X travel, rapid and accuracy are shared.
According to secondary market equipment benchmarks for November 2026, the AWEA LG-6040 is estimated between $157,500 and $314,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,441 / month.
The distance between columns is 4,800 mm, reduced to 4,500 mm when the water eliminator is fitted. Y travel is 4,000 mm (157.5 in) and the table is 3,800 mm (149.6 in) wide, so the spindle cannot reach the full width of a part that fills the opening.
On X, yes. AWEA's description of the rack and pinion drive for X travels of 6 m and above includes a high resolution linear scale. With it the table lists X positioning of P = 0.035 mm and repeatability of Ps = 0.026 mm under VDI.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.