The AWEA LP-3016 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 3000 x 1600 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-3016: 3,000 x 1,600 x 760 mm bridge type machining center, 3,260 x 1,500 mm table, 10,000 kg load, 28,500 kg weight, BT50 6,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 1,600 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 3,260 x 1,500 mm (128.3 x 59.1 in) |
| Max Table Load Capacity | 10,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 28,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 3,260 x 1,500 mm (128.3 x 59.1 in) |
| Max Table Load | 10,000 kg (22,046 lb) |
| Distance Spindle Nose To Table | 240 ~ 1,000 mm (9.4 ~ 39.4 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (40 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.020 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (7.5 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 420 liter (1.5 HP) |
| Machine Weight | 28,500 kg (62,831 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-3016 is estimated between $83,000 and $147,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,287 / month.
The LP-3016, at 28,500 kg (62,831 lb). The SP-3016 weighs 23,500 kg (51,808 lb) and matches the LP on table size and on the 10,000 kg (22,046 lb) load, with 3,060 mm (120.5 in) of X. The VP-3016 weighs 24,000 kg (52,910 lb), carries 7,000 kg (15,432 lb) and has faster Y and Z rapids of 24 m/min (945 ipm) and 20 m/min (787 ipm).
No. The table is 3,260 mm (128.3 in) long and X travel is 3,000 mm (118.1 in), so the spindle centre does not reach both ends. Across the table the situation is reversed: Y travel is 1,600 mm (63.0 in) over a 1,500 mm width, which lets a cutter run off both edges.
AWEA states that the LP series can be equipped with an automatic head changer and a vertical / horizontal ATC system, which turns it into a 5-face machining center. Those configurations carry their own model names and spec tables. The LP-3016YF has the same 3,260 x 1,500 mm table and 1,900 mm (74.8 in) of Y travel.
Under JIS the table gives ± 0.015 mm over full travel and ± 0.003 mm repeatability. Under VDI it gives P ≤ 0.025 mm over full travel and Ps ≤ 0.020 mm. The VDI values depend on length: the LP-2516 lists P ≤ 0.020 mm and the LP-4016 lists P ≤ 0.030 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.