The AWEA LP-3016YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 3000 x 1900 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-3016YF: 5-face bridge machine with 3,000 x 1,900 x 760 mm travels, 3,260 x 1,500 mm table, 10,000 kg load and 20,000 mm/min X and Y rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 1,900 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 3,260 x 1,500 mm (128.3 x 59.1 in) |
| Max Table Load Capacity | 10,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 29,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 1,900 mm (74.8 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 3,260 x 1,500 mm (128.3 x 59.1 in) |
| Max Table Load | 10,000 kg (22,046 lb) |
| Distance Spindle Nose To Table | 400 ~ 1,160 mm (15.7 ~ 45.7 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 , 90 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.020 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 680 liter (1.5 HP) |
| Machine Weight | 29,000 kg (63,933 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-3016YF is estimated between $152,000 and $306,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,356 / month.
Decide on part width. The LP-3016YF has 1,700 mm (66.9 in) between the columns, a 1,500 mm wide table and 1,900 mm (74.8 in) of Y, and its Y axis rapids at 20,000 mm/min (787 ipm). The LP-3021YF has 2,300 mm (90.6 in) between the columns, 2,400 mm (94.5 in) of Y and a 3,020 x 2,010 mm table, with a 15,000 mm/min (591 ipm) Y rapid. Both carry 10,000 kg (22,046 lb).
AWEA gives two sets of figures. Under JIS the positioning accuracy is ± 0.015 mm over full travel with ± 0.003 mm repeatability. Under VDI the values are P ≤ 0.025 mm over full travel and Ps ≤ 0.020 mm. The VDI figures are the ones that change with machine length, so use them when comparing sizes.
The maker places the X-axis ball screw in the centre of the axis within a wide span symmetrical layout, and says this avoids yawing and uneven wear of the guide ways. A ball screw vibration absorber is fitted to reduce vibration of the long screw. The base for this size is described as a one-piece structure with 2 roller type linear guide ways.
The table lists 6,000 rpm as the base speed and direct drive spindles of 8,000 / 10,000 rpm as options, all on a BT50 (ISO50) taper with DIN69871-A optional. Motor power is 22 / 26 kW (30 / 35 HP). If a direct drive spindle is chosen, AWEA notes that the Z axis can be built with roller type linear guide ways instead of the box way.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.