The AWEA LP-3021YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 3000 x 2400 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-3021YF 5-face bridge machining center: 3,000 x 2,400 x 760 mm travels, 3,020 x 2,010 mm table, 10,000 kg load, 6,000 rpm BT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 2,400 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 3,020 x 2,010 mm (118.9 x 79.1 in) |
| Max Table Load Capacity | 10,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 34,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 2,400 mm (94.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 3,020 x 2,010 mm (118.9 x 79.1 in) |
| Max Table Load | 10,000 kg (22,046 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.020 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 34,000 kg (74,956 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-3021YF is estimated between $154,500 and $310,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,395 / month.
Y travel and the 5-face equipment. The LP-3021 has 2,100 mm (82.7 in) of Y as standard and a spindle nose range of 240 ~ 1,000 mm (9.4 ~ 39.4 in). The LP-3021YF has 2,400 mm (94.5 in) of Y and a nose range of 200 ~ 960 mm (7.9 ~ 37.8 in). Table size, table load, column spacing and X rapid are the same on both.
X rapids at 20,000 mm/min (787 ipm), Y and Z at 15,000 mm/min (591 ipm). Cutting feed is 1 ~ 10,000 mm/min (0.04 ~ 394 ipm). The X figure falls with length in this group: the LP-4021YF is listed at 15,000 mm/min (591 ipm) on X.
The table lists 6,000 rpm with a 22 / 26 kW (30 / 35 HP) motor, plus direct drive 8,000 / 10,000 rpm as options. AWEA gives 642 N-m at 387 rpm for the 6,000 rpm high torque spindle and 165 N-m at 1,500 rpm for the direct drive design. The taper is BT50 (ISO50), with DIN69871-A as an option.
In an automatic head storage magazine with two cabinets, one for the horizontal head and one for the spindle cap. AWEA says the heads slide on linear guide ways for a quick change, and that each cabinet has an independent swing door which opens only when a head is being exchanged.
Two standards are given. Under JIS positioning is ± 0.015 mm over full travel and repeatability ± 0.003 mm. Under VDI positioning is P ≤ 0.025 mm over full travel and repeatability Ps ≤ 0.020 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.