The AWEA LP-3025YZF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 3000 x 3200 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-3025YZF: 5-face bridge machining center with 3,000 x 3,200 x 1,000 mm travel, 4,000 rpm high torque BT50 spindle and a 12,000 kg table.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 3,200 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 3,020 x 2,400 mm (118.9 x 94.5 in) |
| Max Table Load Capacity | 12,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 39,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 3,020 x 2,400 mm (118.9 x 94.5 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.020 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 39,000 kg (85,979 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-3025YZF is estimated between $156,500 and $313,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,426 / month.
Z travel, spindle and weight. The LP-3025YZF has 1,000 mm (39.4 in) of Z, a 4,000 rpm standard spindle and weighs 39,000 kg (85,979 lb). The LP-3025YF has 760 mm (29.9 in) of Z, a 6,000 rpm spindle and weighs 36,000 kg (79,365 lb). X travel, Y travel, the table and the 12,000 kg (26,455 lb) load do not change.
According to secondary market equipment benchmarks for November 2026, the AWEA LP-3025YZF is estimated between $156,500 and $313,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,426 / month.
The standard Z axis is a box way, hardened and precisely ground, which AWEA describes as suited to heavy-duty cutting. Roller type linear guide ways on Z are offered as an option only together with the high speed direct drive spindle. X and Y use roller type linear guide ways in every case.
The distance from spindle nose to table top runs from 200 mm to 1,200 mm (7.9 ~ 47.2 in). That is the vertical-spindle figure. A milling head, a fixture and the tool itself all come out of that distance, so check the stack for the tallest setup before settling on this Z stroke.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.