The AWEA LP-4033YZF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 4000 x 3900 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-4033YZF 5-face bridge machine: 4,000 x 3,900 x 1,000 mm travels, 4,000 rpm gear spindle with 977 N-m, BT50, 15,000 kg table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 3,900 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 46,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 3,900 mm (153.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 15,000 mm/min (591 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.025 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,000 liter (1.5 HP) |
| Machine Weight | 46,000 kg (101,411 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-4033YZF is estimated between $154,000 and $309,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,387 / month.
The LP-4033YZF has 1,000 mm (39.4 in) of Z and a 4,000 rpm standard spindle; the LP-4033YF has 760 mm (29.9 in) of Z and a 6,000 rpm spindle. Rapids differ too: the YZF runs Y at 15,000 mm/min (591 ipm) and Z at 10,000 mm/min (394 ipm), the LP-4033YF the other way round. X and Y travel, column spacing and the 15,000 kg (33,069 lb) table load are shared.
According to secondary market equipment benchmarks for November 2026, the AWEA LP-4033YZF is estimated between $154,000 and $309,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,387 / month.
Two families. The built-in motorized spindle comes in 6,000 rpm and 8,000 rpm versions with up to 600 N-m at 350 rpm. The direct drive spindle comes in 8,000 rpm and 10,000 rpm versions with up to 165 N-m at 1,500 rpm. With the direct drive spindle the Z axis can be supplied on roller type linear guide ways instead of the standard box way.
No. The LP-4033YZF lists P ≤ 0.030 mm positioning accuracy over full travel and Ps ≤ 0.025 mm repeatability under VDI, and ± 0.003 mm repeatability under JIS. Those are the same values the LP-4033YF carries, and the tightest in the 33YZF group.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.