The AWEA LP-5033 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5000 x 3300 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-5033 bridge machining center: 5,000 x 3,300 mm travel, 3,500 mm between columns, 18,000 kg table load, gear spindle up to 977 N-m.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 3,300 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load Capacity | 18,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 49,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 3,300 mm (129.9 in) (4,000 mm Opt.) |
| Z Axis Travel | 760 mm (29.9 in) (1,000 / 1,200 / 1,400 mm Opt.) |
| Table Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Spindle Nose To Table | 240 ~ 1,000 mm (9.4 ~ 39.4 in) (200 ~ 1,200 mm / 200 ~ 1,400 mm / 200 ~ 1,600 mm Opt.) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm (Std.) Z-axis : 1,000 / 1,200 / 1,400 mm ; Gear 4,000 / 5,000 rpm (Opt.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.030 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 49,000 kg (108,025 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-5033 is estimated between $80,000 and $143,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,240 / month.
AWEA gives these maximum figures: 977 N-m at 254 rpm for the 4,000 rpm gear spindle, 642 N-m at 387 rpm for the 6,000 rpm gear spindle, 600 N-m at 350 rpm for the built-in motorized spindles (6,000 and 8,000 rpm) and 165 N-m at 1,500 rpm for the direct drive spindles (8,000 and 10,000 rpm). The 6,000 rpm spindle is standard; the others are options.
Both. X and Y use roller type linear guide ways, and the Y-axis guide ways are offset from each other on the cross beam, which AWEA says shortens the distance between spindle and beam. Z uses a hardened, ground box way. With a high speed direct drive spindle, Z can optionally be built with roller type linear guide ways.
The LP-5033 has 3,300 mm (129.9 in) of Y travel and a 5,020 x 2,400 mm (197.6 x 94.5 in) table at 49,000 kg (108,025 lb) machine weight. The MVP-5040 has 4,000 mm (157.5 in) of Y, a 5,020 x 3,010 mm (197.6 x 118.5 in) table and weighs 83,500 kg (184,083 lb). Both carry 18,000 kg (39,683 lb) and both have 3,500 mm (137.8 in) between columns.
The spindle uses a floating type hydraulic tool release device. According to AWEA it eliminates pressure on the spindle bearing when a tool is released. The taper is BT50 (ISO50), with DIN69871-A as an option, and tools may weigh up to 20 kg (44 lb).
Under VDI the positioning accuracy is P ≤ 0.040 mm over full travel and the repeatability Ps ≤ 0.030 mm. Repeatability under JIS is ± 0.003 mm. These VDI figures equal those of the LP-5025, which has the same X travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.