The AWEA LP-6033 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 6000 x 3300 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-6033: 6,000 x 3,300 mm bridge type machining center with 3,500 mm between columns, 20,000 kg table load and 57,000 kg machine weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 3,300 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 57,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,300 mm (129.9 in) (4,000 mm Opt.) |
| Z Axis Travel | 760 mm (29.9 in) (1,000 / 1,200 / 1,400 mm Opt.) |
| Table Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Spindle Nose To Table | 240 ~ 1,000 mm (9.4 ~ 39.4 in) (200 ~ 1,200 mm / 200 ~ 1,400 mm / 200 ~ 1,600 mm Opt.) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm (Std.) Z-axis : 1,000 / 1,200 / 1,400 mm ; Gear 4,000 / 5,000 rpm (Opt.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 57,000 kg (125,661 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-6033 is estimated between $83,500 and $148,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,294 / month.
According to secondary market equipment benchmarks for November 2026, the AWEA LP-6033 is estimated between $83,500 and $148,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,294 / month.
The table gives P ≤ 0.050 mm and Ps ≤ 0.035 mm (VDI) for the LP-6033, and P = 0.040 mm and Ps = 0.030 mm for the LP-7033. The LP-6033 page does not explain the difference, so it should be raised with AWEA before ordering if full-travel positioning is critical.
The LP-6033 weighs 57,000 kg (125,661 lb); the LP-6025 weighs 50,000 kg (110,229 lb). Table size and table load are the same on both. The extra weight belongs to the wider bridge: 3,500 mm (137.8 in) between columns against 2,700 mm (106.3 in) on the LP-6025.
By a ball screw placed in the centre of the axis. AWEA calls this a wide span symmetrical center-driven design and says it avoids yawing and uneven guide way wear. A ball screw vibration absorber is fitted to reduce the vibration of the long screw. X and Y run on roller type linear guide ways.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.