The AWEA MCP-18050 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 18000 x 5400 x 1400 mm, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MCP-18050 moving column multi-face machining center: fixed 18,000 x 3,800 mm table, 18,000 mm X, 5,400 mm Y, 1,400 mm Z, BBT50, 40T.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 18,000 mm |
| Y-Axis Travel | 5,400 mm |
| Z-Axis Travel | 1,400 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 18,000 x 3,800 mm (708.7 x 149.6 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 18,000 mm (708.7 in) |
| Y Axis Travel | 5,400 mm (212.6 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 18,000 x 3,800 mm (708.7 x 149.6 in) |
| Distance Spindle Nose To Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns With X Axis Covers | 4,700 mm (4,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.);5,000 / 6,000 Gear Spindle (Opt.);8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 7.5 / 10 m/min (394 / 295 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 4,000 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
According to secondary market equipment benchmarks for November 2026, the AWEA MCP-18050 is estimated between $156,000 and $312,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,418 / month.
The layout supports it: the table is fixed, 18,000 x 3,800 mm (708.7 x 149.6 in), and the column with its magazine moves along it. Whether an operator may work at one end while the machine cuts at the other depends on guarding and zone separation, which AWEA's page does not describe. Raise it when specifying the machine.
According to secondary market equipment benchmarks for November 2026, the AWEA MCP-18050 is estimated between $156,000 and $312,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,418 / month.
AWEA's table for the MCP series does not state one. It gives the table size, 18,000 x 3,800 mm (708.7 x 149.6 in), but no load figure for any model in the group. Ask the maker for the permitted load before planning heavy castings or several parts on the table at once.
From above or from the side onto a table that stays still. AWEA points to low side structures and a big, open machining area for convenient and safe loading of large workpieces. Clearance between the columns is 4,700 mm, or 4,500 mm with X-axis covers, and the spindle nose rises to 2,200 mm (86.6 in) above the table.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.