The AWEA MCP-8060 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 8000 x 6400 x 1400 mm, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MCP-8060 moving column 5-face bridge mill: 8,000 x 6,400 x 1,400 mm travels, 8,000 x 4,800 mm table, BBT50 spindle, 22 / 26 kW, 40T.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 8,000 mm |
| Y-Axis Travel | 6,400 mm |
| Z-Axis Travel | 1,400 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 8,000 x 4,800 mm (315.0 x 189.0 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 8,000 mm (315.0 in) |
| Y Axis Travel | 6,400 mm (252.0 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 8,000 x 4,800 mm (315.0 x 189.0 in) |
| Distance Spindle Nose To Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns With X Axis Covers | 5,700 mm (5,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.);5,000 / 6,000 Gear Spindle (Opt.);8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 10 / 10 m/min (394 / 394 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 5,400 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
According to secondary market equipment benchmarks for November 2026, the AWEA MCP-8060 is estimated between $160,000 and $318,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,480 / month.
The table is 4,800 mm (189.0 in) wide and the Y axis travels 6,400 mm (252.0 in). AWEA lists 5,700 mm between the columns, or 5,500 mm with the X-axis covers. The Y stroke is longer than the table is wide, which leaves the head room to move out past the part edge, as side machining with an attachment head requires.
The bridge. All three have 8,000 mm (315.0 in) of X travel. The MCP-8060 has 6,400 mm (252.0 in) of Y over a 4,800 mm wide table. The MCP-8050 has 5,400 mm (212.6 in) of Y and a 3,800 mm wide table, and the MCP-8040 has 4,400 mm (173.2 in) and a 2,800 mm wide table. Spindle, Z travel and magazine are the same across the three.
AWEA states that an automatic head changer and a two positions ATC system are standardly equipped for multi-face machining, and that a new generation of in-house made attachment heads is available. Which heads are included with a given machine is not in the specification table, so that has to be settled in the order.
No. The specification table gives the table as 8,000 x 4,800 mm (315.0 x 189.0 in) and states no load figure. On a moving column machine the table does not travel, so the part's weight is carried by a stationary bed rather than by the X-axis drive, but the permitted load still has to be confirmed with the maker.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.