The AWEA MVP-4040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 4000 x 4000 x 1000 mm, a top spindle speed of 10 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MVP-4040: 4,000 x 4,000 mm five-face bridge machining center, 3,500 mm between columns, 4,020 x 3,010 mm table, 15,000 kg load, BT 50.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 4,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 10 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 50 |
| Table / Platter / Chuck Size | 4,020 x 3,010 mm (158.3 x 118.5 in) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 78,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 4,000 mm (157.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400 mm) |
| W Axis Travel | 1,250 mm (49.2 in) |
| Table Size | 4,020 x 3,010 mm (158.3 x 118.5 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Distance Spindle Nose To Table | 200 ~ 2,450 mm (7.9 ~ 96.5 in) |
| Max Spindle Speed | V : 10 ~ 4,000 rpm ; H : 20 ~ 3,000 rpm |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 |
| Tool Capacity | 60 T |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | P = 0.018 mm |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 10 m/min (394 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Rapid Traverse W | 3 m/min (118 ipm) |
| Cutting Feed Rate | 5 m/min (197 ipm) |
| Power Requirement | AC 220 + 10% 3 phase / 80 KVA |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 290 L |
| Lubrication Tank Capacity | 6 L |
| Coolant Tank Capacity | 1,200 L |
| Machine Weight | 78,500 kg (173,060 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA MVP-4040 is estimated between $152,000 and $306,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,356 / month.
The distance between columns is 3,500 mm (137.8 in), the table is 3,010 mm (118.5 in) wide and Y travel is 4,000 mm (157.5 in). The Y stroke is longer than the column gap, which gives the horizontal head room to stand off beside the part and cut its side faces.
In Y, yes: 10 m/min (394 ipm) against 12 m/min (472 ipm) on the MVP-4032. X at 15 m/min (591 ipm), Z at 10 m/min (394 ipm) and W at 3 m/min (118 ipm) are identical, and so is the 5 m/min (197 ipm) cutting feed rate.
The table lists the distance from spindle nose to table as 200 ~ 2,450 mm (7.9 ~ 96.5 in). That range comes from the 1,250 mm (49.2 in) W travel of the cross rail together with the 1,000 mm (39.4 in) Z stroke. Fixture height and tool length both come out of it.
The MVP-5040 keeps the 4,000 mm (157.5 in) Y travel and adds X: 5,000 mm (196.9 in), with an 18,000 kg (39,683 lb) table load. The MVP-5040 rapids X at 10 m/min (394 ipm) with VDI positioning accuracy of P = 0.030 mm, where the MVP-4040 is listed at 15 m/min (591 ipm) and P = 0.025 mm. The MVP-5040 weighs 83,500 kg (184,083 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.