The AWEA MVP-7032 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 7000 x 3200 x 1000 mm, a top spindle speed of 10 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MVP-7032: five-face bridge machining center with 7,000 mm X travel, 7,020 x 2,400 mm table, 20,000 kg load, BT 50 gear spindle, 26 kW.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 7,000 mm |
| Y-Axis Travel | 3,200 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 10 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 50 |
| Table / Platter / Chuck Size | 7,020 x 2,400 mm (276.4 x 94.5 in) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 85,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 7,000 mm (275.6 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400 mm) |
| W Axis Travel | 1,250 mm (49.2 in) |
| Table Size | 7,020 x 2,400 mm (276.4 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose To Table | 200 ~ 2,450 mm (7.87" ~ 96.45") |
| Max Spindle Speed | V : 10 ~ 4,000 rpm ; H : 20 ~ 3,000 rpm |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 |
| Rapid Traverse X | 7.5 m/min (295 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Rapid Traverse W | 3 m/min (118 ipm) |
| Cutting Feed Rate | 5 m/min (197 ipm) |
| Tool Capacity | 60 T |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | P = 0.030 mm |
| Power Requirement | AC 220 + 10% 3 phase / 80 KVA |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 290 L |
| Lubrication Tank Capacity | 6 L |
| Coolant Tank Capacity | 750 L |
| Machine Weight | 85,000 kg (187,390 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA MVP-7032 is estimated between $160,000 and $318,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,480 / month.
Under VDI the listed positioning accuracy widens with X travel: P = 0.025 mm on the MVP-4032, P = 0.030 mm on the MVP-5032, P = 0.035 mm on the MVP-6032 and P = 0.040 mm on the MVP-7032, each over full travel. The JIS figure is printed as ± 0.010 mm over full travel for all of them.
The vertical spindle and the horizontal spindle head are standard; the horizontal head indexes on a curvic coupling in 5° increments (72 positions) and is oil mist lubricated. AWEA lists three optional heads: an extension head, a 35° angular head and a universal head. The maker's page also mentions automatic exchange of optional heads.
Yes. AWEA says the standard 4,000 rpm 2-step gear transmission can optionally be replaced with either a direct drive spindle or a built-in spindle, and that coolant through spindle is also available. The spec table on this page describes the standard build: 10 ~ 4,000 rpm vertical, 22 / 26 kW (30 / 35 HP), BT 50.
Y travel is 3,200 mm (126.0 in), the table is 2,400 mm (94.5 in) wide and the columns are 2,700 mm (106.3 in) apart. For wider work the MVP-7040 has 4,000 mm (157.5 in) of Y travel and 3,500 mm (137.8 in) between columns, with the same 7,000 mm (275.6 in) X travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.