The AWEA MVP-8040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 8000 x 4000 x 1000 mm, a top spindle speed of 10 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MVP-8040: 8,000 x 4,000 mm five-face bridge machining center, 8,040 x 3,010 mm table, 25,000 kg load, 20 m/min X rapid, 122,000 kg weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 8,000 mm |
| Y-Axis Travel | 4,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 10 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 50 |
| Table / Platter / Chuck Size | 8,040 x 3,010 mm (316.5 x 118.5 in) |
| Max Table Load Capacity | 25,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 122,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 8,000 mm (315.0 in) |
| Y Axis Travel | 4,000 mm (157.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400 mm) |
| W Axis Travel | 1,250 mm (49.2 in) |
| Table Size | 8,040 x 3,010 mm (316.5 x 118.5 in) |
| Max Table Load | 25,000 kg (55,115 lb) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Distance Spindle Nose To Table | 200 ~ 2,450 mm (7.9 ~ 96.5 in) |
| Max Spindle Speed | V : 10 ~ 4,000 rpm ; H : 20 ~ 3,000 rpm |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 |
| Tool Capacity | 60 T |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | P = 0.030 mm |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 10 m/min (394 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Rapid Traverse W | 3 m/min (118 ipm) |
| Cutting Feed Rate | 5 m/min (197 ipm) |
| Power Requirement | AC 220 + 10% 3 phase / 80 KVA |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 290 L |
| Lubrication Tank Capacity | 6 L |
| Coolant Tank Capacity | 1,200 L |
| Machine Weight | 122,000 kg (268,959 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA MVP-8040 is estimated between $159,500 and $317,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,472 / month.
AWEA's specification lists 25,000 kg (55,115 lb) on the 8,040 x 3,010 mm (316.5 x 118.5 in) table. Every other MVP model from 6,000 mm of X travel upward, the MVP-8032 included, is listed at 20,000 kg (44,092 lb).
The listed rapid rates are 20 m/min (787 ipm) in X, 10 m/min (394 ipm) in Y and Z, and 3 m/min (118 ipm) in W. Cutting feed rate is 5 m/min (197 ipm). For comparison, the MVP-8032 is listed at 7.5 m/min (295 ipm) in X and 12 m/min (472 ipm) in Y.
According to secondary market equipment benchmarks for November 2026, the AWEA MVP-8040 is estimated between $159,500 and $317,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,472 / month.
No. The spindle rows are the same across the series: BT 50, 22 / 26 kW (30 / 35 HP), 10 ~ 4,000 rpm vertical, 20 ~ 3,000 rpm horizontal. AWEA offers a direct drive spindle or a built-in spindle in place of the standard 2-step gear transmission, and optional extension, 35° angular and universal heads.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.