The AWEA RG5-3225 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 3200 x 2500 x 1000 mm, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA RG5-3225: gantry 5-axis with 3,200 x 2,500 mm fixed table, 1,000 mm Z, HSK-A63 or HSK-A100 two axes head, 45,000 kg machine weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,200 mm |
| Y-Axis Travel | 2,500 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | -20 RPM |
| Spindle Taper Interface | TCH-20F : HSK-A63 TCH-20F-A : HSK-A100 |
| Table / Platter / Chuck Size | 3,200 x 2,500 mm (126.0 x 98.4 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Approx. Machine Weight | 45,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,200 mm (126.0 in) |
| Y Axis Travel | 2,500 mm (98.4 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 3,200 x 2,500 mm (126.0 x 98.4 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Between Columns With Water Eliminator | 3,500 (3,300) mm |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance 90 Deg Spindle Center To Table | 510 ~ 1,510 mm (20.1 ~ 59.4 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy X Vdi 3441 | P = 0.025 mm / Full Travel |
| Positioning Accuracy Y Vdi 3441 | P = 0.020 mm / Full Travel |
| Positioning Accuracy Z Vdi 3441 | P = 0.016 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm / Full Travel |
| Repeatability X Vdi 3441 | Ps = 0.018 mm |
| Repeatability Y Vdi 3441 | Ps = 0.015 mm |
| Repeatability Z Vdi 3441 | Ps = 0.012 mm |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Yz | 24 m/min (945 ipm) |
| Cutting Feed Rate | 1 ~ 20 m/min (39 ~ 787 ipm) |
| Coolant Tank Capacity | 700 L |
| Lubrication Tank Capacity | 6 L |
| Hydraulic Tank Capacity | 60 L |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Machine Weight | 45,000 kg (99,206 lb) |
| Max Workpiece Dimensions | 3,200 x 2,500 x 1,000 mm (126.0 x 98.4 x 39.4 in) |
| Tool Capacity | 24 T |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 8 kg (18 lb) |
| Max Tool Diameter | Ø100 / Ø180 mm (Ø3.9 / Ø7.1 in) |
| Spindle Taper | TCH-20F : HSK-A63 TCH-20F-A : HSK-A100 |
| Spindle Power S1 S6 40 | TCH-20F : 42 / 55 kW TCH-20F-A : 50 / 65 kW |
| Max Spindle Speed | TCH-20F : Built-in 24,000 rpm TCH-20F-A : Built-in 15,000 rpm |
| T Slots | 28 x 200 mm |
According to secondary market equipment benchmarks for November 2026, the AWEA RG5-3225 is estimated between $159,000 and $316,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,465 / month.
X travel goes from 1,600 mm (63.0 in) on the RG5-1625 to 3,200 mm (126.0 in), and the table grows to 3,200 x 2,500 mm (126.0 x 98.4 in). X rapid drops from 24 m/min (945 ipm) on the RG5-1625 to 20 m/min (787 ipm). Machine weight rises from the 35,000 kg (77,160 lb) of the RG5-1625 to 45,000 kg (99,206 lb). Y, Z, heads, magazine and tanks are the same.
According to secondary market equipment benchmarks for November 2026, the AWEA RG5-3225 is estimated between $159,000 and $316,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,465 / month.
The X axis has one linear scale on each column, and the cross beam rides on a U-shaped base with dual linear guide ways on each side. Listed X figures under the VDI standard are P = 0.025 mm and Ps = 0.018 mm. JIS values are ± 0.010 mm positioning and ± 0.003 mm repeatability over full travel. Hollow ball screw cooling for X and Y is described as an option.
Slower in traverse. The RG5-3225 rapids at 20 m/min (787 ipm) in X and 24 m/min (945 ipm) in Y and Z. The AG5-3220, with linear motors, is listed at 60 m/min (2,362 ipm) in X and Y. What the RG5-3225 gives in return is 2,500 mm (98.4 in) of Y against the 2,000 mm (78.7 in) of the AG5-3220, and the HSK-A100 head option.
Spindle nose to table distance is 200 ~ 1,200 mm (7.9 ~ 47.2 in) over the 1,000 mm (39.4 in) Z travel. With the spindle axis horizontal, its center is 510 ~ 1,510 mm (20.1 ~ 59.4 in) from the table. Tools can be up to 400 mm (15.7 in) long, which has to be counted into that clearance.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.