The AWEA SP-2016 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 2100 x 1600 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA SP-2016 bridge machining center: 2,100 x 1,600 x 760 mm travels, 8,000 kg table load, 6,000 rpm BT50 gear spindle, 22 / 26 kW, 32 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,100 mm |
| Y-Axis Travel | 1,600 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 2,310 x 1,500 mm (90.9 x 59.1 in) |
| Max Table Load Capacity | 8,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 19,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,100 mm (82.7 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 2,310 x 1,500 mm (90.9 x 59.1 in) |
| Max Table Load | 8,000 kg (17,637 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (24 / 40 / 60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.020 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.015 mm |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 120 liter (7.5 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 420 liter (1 HP) |
| Machine Weight | 19,000 kg (41,887 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA SP-2016 is estimated between $85,500 and $151,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,325 / month.
The two share 1,600 mm (63.0 in) of Y, 760 mm (29.9 in) of Z, a 6,000 rpm gear spindle and a 22 / 26 kW motor. The SP-2016 has 2,100 mm (82.7 in) of X and carries 8,000 kg (17,637 lb) on a 2,310 x 1,500 mm (90.9 x 59.1 in) table. The VP-2016 has 2,000 mm (78.7 in) of X, carries 5,000 kg (11,023 lb) on a 2,000 x 1,500 mm (78.7 x 59.1 in) table and has the faster X rapid, 24 m/min (945 ipm).
The standard unit is a 6,000 rpm gear spindle with a 2-speed gear box, rated 22 / 26 kW (30 / 35 HP), with a maximum torque of 642 N-m at 387 rpm. AWEA also offers direct drive spindles of 8,000 rpm and 10,000 rpm, which give a maximum of 165 N-m at 1,500 rpm. With a direct drive spindle the Z axis can optionally run on roller type linear guide ways instead of the standard box way.
AWEA gives two sets of figures. Under the JIS standard, positioning is ± 0.015 mm over full travel and repeatability ± 0.003 mm. Under the VDI standard, positioning is P ≤ 0.020 mm over full travel and repeatability Ps ≤ 0.015 mm. The VDI values widen on the longer models, to P ≤ 0.025 mm on the SP-3016 and P ≤ 0.030 mm on the SP-4016.
The machine weighs 19,000 kg (41,887 lb). The table is 2,310 x 1,500 mm (90.9 x 59.1 in) and takes 8,000 kg (17,637 lb). Width is limited by the 1,700 mm (66.9 in) between the columns, and height by the 200 ~ 960 mm (7.9 ~ 37.8 in) between spindle nose and table.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.