The AWEA AF-1600II is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC Oi-MF PLUS. It offers working travels of 1600 x 740 x 610 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA AF-1600II: 1,600 x 740 x 610 mm travels, 1,700 x 740 mm table, 1,450 kg load, 30-tool magazine, 12,000 rpm direct-drive BT40 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC Oi-MF PLUS |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,600 mm |
| Y-Axis Travel | 740 mm |
| Z-Axis Travel | 610 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | BT40 |
| Table / Platter / Chuck Size | 1,700 x 740 mm (66.9 x 29.1 in) |
| Max Table Load Capacity | 1,450 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Rapid Traverse Rate | 36 m/min (1,417 ipm) |
| Approx. Machine Weight | 8,600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 1,600 mm (63.0 in) |
| Y Axis Travel | 740 mm (29.1 in) |
| Z Axis Travel | 610 mm (24.0 in) |
| Table Size | 1,700 x 740 mm (66.9 x 29.1 in) |
| Max Table Load | 1,450 kg (3,197 lb) |
| Distance Spindle Center To Column | 780 mm (30.7 in) |
| Distance Spindle Nose To Table | 125 ~ 735 mm (4.9 ~ 28.9 in) |
| T Slots | 18 mm x 100 mm x 7 |
| Spindle Taper | BT40 |
| Spindle Motor Power | 11 / 15 kW (14.8 / 20.1 hp) |
| Max Spindle Speed | Direct-drive 12,000 rpm |
| Rapid Traverse Xy | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 24 m/min (945 ipm) |
| Cutting Feed Rate | 15 m/min (591 ipm) |
| Tool Capacity | 30 T |
| Max Tool Length | 250 mm (9.8 in) |
| Max Tool Weight | 8 kg (18 lb) |
| Max Tool Diameter | Ø75 / Ø150 mm (Ø3.0 / Ø5.9 in) |
| Positioning Accuracy | 0.008 mm |
| Repeatability | 0.006 mm |
| CNC Control | FANUC Oi-MF PLUS |
| Air Pressure Requirement | 6 kg/cm² |
| Power Requirement | 35 kVA |
| Coolant Tank Capacity | 486 liter |
| Machine Weight | 8,600 kg (18,959 lb) |
The price estimate for the AWEA AF-1600II is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-af-1600ii#price; the request is passed to AWEA or an authorised dealer.
AWEA's table lists a tool magazine capacity of 30 T for the AF-1600II, where the other AF models list 24 T. Maximum tool length is 250 mm (9.8 in), maximum weight 8 kg (18 lb), and maximum diameter Ø75 mm, or Ø150 mm with adjacent pockets empty. The magazine is attached to the column.
The specification table shows BT40 only for the AF-1600II, while the AF-1400II and the AF-1600MAX are shown as BT40 with BT50 optional. AWEA describes a 6,000 rpm BT50 gear spindle for the series and asks buyers to check applicable models with the sales representative, so confirm before assuming it can be ordered on this machine.
The table is 1,700 x 740 mm (66.9 x 29.1 in) with seven T-slots, 18 mm wide at a 100 mm pitch, and it carries 1,450 kg (3,197 lb). Travels are 1,600 mm (63.0 in), 740 mm (29.1 in) and 610 mm (24.0 in) in X, Y and Z.
X travel is the same at 1,600 mm (63.0 in). The AF-1600MAX has 800 mm (31.5 in) of Y and Z, a 1,500 kg (3,307 lb) table load, 30 m/min (1,181 ipm) X and Y rapids and weighs 16,000 kg (35,273 lb). The AF-1600II is lighter at 8,600 kg (18,959 lb), moves at 36 m/min (1,417 ipm) and has the 30-tool magazine.
