The AWEA LG-10050 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 5000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10050: 10,000 x 5,000 x 1,000 mm gantry 5-face machining center with a 10,000 x 4,800 mm fixed table, 2,500 kg/m², CAT50, 20 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 5,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 4,800 mm (393.7 x 189.0 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 5,000 mm (196.9 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 4,800 mm (393.7 x 189.0 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 5,800 (5,500) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.030 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,900 liter |
The price estimate for the AWEA LG-10050 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-10050#price; the request is passed to AWEA or an authorised dealer.
X travel is 10,000 mm (393.7 in) on all of them. The LG-10040 has 4,000 mm (157.5 in) of Y travel and a Y rapid of 15 m/min (591 ipm). The LG-10050 has 5,000 mm (196.9 in) and 12 m/min (472 ipm). The LG-10070 has 7,000 mm (275.6 in) and 10 m/min (394 ipm), so the cross axis slows as it widens. The X-axis accuracy figures are identical at P = 0.050 mm and Ps = 0.038 mm.
Not in the table. X rapid traverse is 20 m/min (787 ipm), the same figure AWEA lists for the LG-6050 and LG-8050. What widens with length is X-axis positioning accuracy, which is P = 0.050 mm under the VDI standard on this model.
AWEA describes a separate type coolant tank and two rotating chip augers on both sides of the working table. The coolant tank capacity of the LG-10050 is 1,900 liter. The hydraulic tank holds 120 liter and the lubrication tank 6 liter.
The row is printed as 5,800 (5,500), where the figure in brackets applies with the water eliminator. The table between them is 4,800 mm wide and Y travel is 5,000 mm (196.9 in). On the LG-10070 the same row reads 7,800 mm (7,500 mm).
