The AWEA LG-6050 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 5000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-6050 gantry 5-face machining center: 6,000 x 5,000 x 1,000 mm travels, 6,000 x 4,800 mm fixed table at 2,500 kg/m², CAT50 gear spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 5,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 6,000 x 4,800 mm (236.2 x 189.0 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 5,000 mm (196.9 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 6,000 x 4,800 mm (236.2 x 189.0 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 5,800 (5,500) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.035 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.026 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.030 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,900 liter |
The price estimate for the AWEA LG-6050 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-6050#price; the request is passed to AWEA or an authorised dealer.
Choose by part width. The LG-6050 has 5,000 mm (196.9 in) of Y travel and a 6,000 x 4,800 mm (236.2 x 189.0 in) table; the LG-6040 has 4,000 mm (157.5 in) of Y and a 6,000 x 3,800 mm (236.2 x 149.6 in) table. The LG-6040 has the faster Y rapid, 15 m/min (591 ipm) against 12 m/min (472 ipm), and a Y/Z positioning figure of P = 0.030 mm against P = 0.040 mm. X travel, X rapid and the spindle choices are the same.
Per unit of area: 2,500 kg/m². AWEA doesn't print a single maximum weight for this model. The table is a fixed, floor type design of double layer construction attached to the base, so check the load under the footprint of the part and its supports against that figure.
AWEA states that LG models with X-axis travel 6 m and above use its patented zero backlash rack & pinion with a 1µm high resolution linear scale, under synchronous servo control. On the LG-6050 the X rapid is 20 m/min (787 ipm) and the X positioning accuracy under the VDI standard is P = 0.035 mm with a repeatability of Ps = 0.026 mm.
The distance from spindle nose to table is 200 ~ 1,200 mm (7.9 ~ 47.2 in), with a Z travel of 1,000 mm (39.4 in). The row for the distance between columns reads 5,800 (5,500), the bracketed figure applying with the water eliminator fitted.
