The AWEA LP-5016YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 5000 x 1900 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-5016YF: 5,000 x 1,900 x 760 mm 5-face bridge machine, 5,000 x 1,500 mm table, 14,000 kg load, 6,000 rpm gear spindle, 36,000 kg weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 1,900 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 5,000 x 1,500 mm (196.9 x 59.1 in) |
| Max Table Load Capacity | 14,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 36,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 1,900 mm (74.8 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 5,000 x 1,500 mm (196.9 x 59.1 in) |
| Max Table Load | 14,000 kg (30,864 lb) |
| Distance Spindle Nose To Table | 400 ~ 1,160 mm (15.7 ~ 45.7 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 , 90 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.030 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 680 liter (1.5 HP) |
| Machine Weight | 36,000 kg (79,365 lb) |
The price estimate for the AWEA LP-5016YF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-5016yf#price; the request is passed to AWEA or an authorised dealer.
The LP-5016YF rapids at 10,000 mm/min (394 ipm) on X. The LP-4016YF is listed at 15,000 mm/min (591 ipm), and the LP-3016YF at 20,000 mm/min (787 ipm). Y and Z are the same on all of them. Because the cutting feed range also ends at 10,000 mm/min, non-cutting X moves on this machine take as long as a feed move at full rate.
Both have 5,000 mm of X and a 10,000 mm/min X rapid, and both list P ≤ 0.040 mm under VDI. The LP-5016YF has a 5,000 x 1,500 mm table, 1,700 mm between columns, 14,000 kg (30,864 lb) of load and a weight of 36,000 kg (79,365 lb). The LP-5021YF has a 5,020 x 2,010 mm (197.6 x 79.1 in) table, 2,300 mm (90.6 in) between columns, 15,000 kg (33,069 lb) of load and weighs 42,000 kg (92,593 lb).
AWEA lists 36,000 kg (79,365 lb) for both the LP-5016YF and the LP-5016. The table, load, X travel and X rapid are identical too. The differences are in Y travel, 1,900 mm against the 1,600 mm (63.0 in) of the LP-5016, in the spindle nose height and in the magazine options.
Machine weight is 36,000 kg (79,365 lb) and the table accepts a further 14,000 kg (30,864 lb). AWEA's specification table gives no floor loading or foundation drawing, and no kVA figure for the electrical supply, so request both with the quotation. Air is listed as 5 ~ 8 (5) kg/cm².
AWEA describes an adoptive feed control that watches spindle load and adjusts the axis feed rate, and a tool loading monitor that detects tool breakage. Spindle thermal compensation is marked as an option. On a part that takes hours on each face, these are the functions to ask about for running without an operator at the machine.
