The AWEA LP-5021YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 5000 x 2400 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-5021YF: 5-face bridge machining center with 5,000 mm X travel, 5,020 x 2,010 mm table, 15,000 kg load and 8,000 mm/min cutting feed.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 2,400 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 5,020 x 2,010 mm (197.6 x 79.1 in) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 42,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 2,400 mm (94.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 5,020 x 2,010 mm (197.6 x 79.1 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 8,000 mm/min (0.04 ~ 315 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.030 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 42,000 kg (92,593 lb) |
The price estimate for the AWEA LP-5021YF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-5021yf#price; the request is passed to AWEA or an authorised dealer.
AWEA's table simply lists a lower figure as the travel grows: 20,000 mm/min (787 ipm) on the LP-3021YF, 15,000 mm/min (591 ipm) on the LP-4021YF and 10,000 mm/min (394 ipm) on the LP-5021YF. The maker also fits a vibration absorber to reduce the vibration of the long ball screw, which points to the screw length as the limiting part.
1 ~ 8,000 mm/min (0.04 ~ 315 ipm). That sits between the LP-4021YF at 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) and the LP-6021YF at 1 ~ 5,000 mm/min (0.04 ~ 197 ipm).
On a one-piece base with 4 guide ways. AWEA says the base is enlarged proportional to the length of the travel to eliminate table overhang while keeping structural support. The X and Y axes run on roller type linear guide ways.
15,000 kg (33,069 lb) on a 5,020 x 2,010 mm (197.6 x 79.1 in) table. The next step up in load at this X travel is the LP-5025YF, rated for 18,000 kg (39,683 lb) on a 5,020 x 2,400 mm (197.6 x 94.5 in) table.
Under VDI, P ≤ 0.040 mm over full travel with repeatability of Ps ≤ 0.030 mm. Under JIS, ± 0.015 mm over full travel with repeatability of ± 0.003 mm. The VDI figures are wider than those of the LP-3021YF, which is listed at P ≤ 0.025 mm.
