The AWEA LP-5033 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5000 x 3300 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-5033 bridge machining center: 5,000 x 3,300 mm travel, 3,500 mm between columns, 18,000 kg table load, gear spindle up to 977 N-m.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 3,300 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load Capacity | 18,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 49,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 3,300 mm (129.9 in) (4,000 mm Opt.) |
| Z Axis Travel | 760 mm (29.9 in) (1,000 / 1,200 / 1,400 mm Opt.) |
| Table Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Spindle Nose To Table | 240 ~ 1,000 mm (9.4 ~ 39.4 in) (200 ~ 1,200 mm / 200 ~ 1,400 mm / 200 ~ 1,600 mm Opt.) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm (Std.) Z-axis : 1,000 / 1,200 / 1,400 mm ; Gear 4,000 / 5,000 rpm (Opt.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.030 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 49,000 kg (108,025 lb) |
The price estimate for the AWEA LP-5033 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-5033#price; the request is passed to AWEA or an authorised dealer.
AWEA gives these maximum figures: 977 N-m at 254 rpm for the 4,000 rpm gear spindle, 642 N-m at 387 rpm for the 6,000 rpm gear spindle, 600 N-m at 350 rpm for the built-in motorized spindles (6,000 and 8,000 rpm) and 165 N-m at 1,500 rpm for the direct drive spindles (8,000 and 10,000 rpm). The 6,000 rpm spindle is standard; the others are options.
Both. X and Y use roller type linear guide ways, and the Y-axis guide ways are offset from each other on the cross beam, which AWEA says shortens the distance between spindle and beam. Z uses a hardened, ground box way. With a high speed direct drive spindle, Z can optionally be built with roller type linear guide ways.
The LP-5033 has 3,300 mm (129.9 in) of Y travel and a 5,020 x 2,400 mm (197.6 x 94.5 in) table at 49,000 kg (108,025 lb) machine weight. The MVP-5040 has 4,000 mm (157.5 in) of Y, a 5,020 x 3,010 mm (197.6 x 118.5 in) table and weighs 83,500 kg (184,083 lb). Both carry 18,000 kg (39,683 lb) and both have 3,500 mm (137.8 in) between columns.
The spindle uses a floating type hydraulic tool release device. According to AWEA it eliminates pressure on the spindle bearing when a tool is released. The taper is BT50 (ISO50), with DIN69871-A as an option, and tools may weigh up to 20 kg (44 lb).
Under VDI the positioning accuracy is P ≤ 0.040 mm over full travel and the repeatability Ps ≤ 0.030 mm. Repeatability under JIS is ± 0.003 mm. These VDI figures equal those of the LP-5025, which has the same X travel.
