The AWEA MCP-16060 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 16000 x 6400 x 1400 mm, a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MCP-16060 moving column machining center: 16,000 x 6,400 mm travels, 16,000 x 4,800 mm table, 5,400 liter coolant tank, 80 kVA, BBT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 16,000 mm |
| Y-Axis Travel | 6,400 mm |
| Z-Axis Travel | 1,400 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 16,000 x 4,800 mm (629.9 x 189.0 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 16,000 mm (629.9 in) |
| Y Axis Travel | 6,400 mm (252.0 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 16,000 x 4,800 mm (629.9 x 189.0 in) |
| Distance Spindle Nose To Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns With X Axis Covers | 5,700 mm (5,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.)；5,000 / 6,000 Gear Spindle (Opt.)；8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 10 / 10 m/min (394 / 394 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 5,400 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
The price estimate for the AWEA MCP-16060 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-mcp-16060#price; the request is passed to AWEA or an authorised dealer.
The table lists 220 ± 10 % Vac / 80 kVA. That is the only supply line given. The spindle motor accounts for 22 / 26 kW (29.5 / 34.9 hp) of it. The same requirement is listed for every length in the group, from the MCP-8060 to the MCP-20060.
Coolant tank capacity is 5,400 liter, hydraulic tank capacity 100 liter and lubrication oil tank capacity 6 liter. The coolant figure is tied to the width of the machine: the MCP-16050 lists 4,000 liter and the MCP-16040 lists 3,400 liter with the same hydraulic and lubrication tanks.
AWEA prints the pneumatic pressure requirement as 5 ~ 8 (5) kg/cm². The table does not give an air flow figure, so the compressor capacity needed for the head changer and tool changer has to be asked for separately.
It does not. Neither machine weight nor maximum table load appears in the specification for this model. Because the 16,000 x 4,800 mm (629.9 x 189.0 in) table is fixed and the columns travel beside it, the foundation carries both a static table and moving column loads, and the maker's foundation drawing is the document to work from.
From above or from the side. AWEA describes a big, open machining area with low side structures that makes loading and unloading of large work pieces more convenient and safe. The distance between columns is 5,700 mm, or 5,500 mm with the X-axis covers.
