The AWEA MEGA5 G4037 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 4000 x 3700 x 1200 mm, a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MEGA5 G4037 gantry 5-axis machining center: 4,000 x 3,700 x 1,200 mm travels, 4,000 x 3,800 mm table, HSK-A100 12,000 rpm two-axis head.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 3,700 mm |
| Z-Axis Travel | 1,200 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | HSK-A100 |
| Table / Platter / Chuck Size | 4,000 x 3,800 mm (157.5 x 149.6 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 72,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 3,700 mm (145.7 in) |
| Z Axis Travel | 1,200 mm (47.2 in) (opt. 1,400 mm) |
| Table Size | 4,000 x 3,800 mm (157.5 x 149.6 in) |
| Max Table Load | 2,500 kg / m² |
| Distance Between Columns | 4,800 mm (189.0 in) |
| Distance Spindle Nose To Table | TCH-30F = 200 ~ 1,400 mm (opt. 200 ~ 1,600 mm) TCH-20F = 355 ~ 1,555 mm (opt. 355 ~ 1,755 mm) |
| Distance 90 Deg Spindle Center To Table | TCH-30F = 550 ~ 1,750 mm (opt. 550 ~ 1,950 mm) TCH-20F = 665 ~ 1,865 mm (opt. 665 ~ 2,065 mm) |
| T Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 15 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 20 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter | Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.018 mm |
| Coolant Tank Capacity | 1,600 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 6 ~ 8 kg/cm² |
| Machine Weight | 72,000 kg (158,730 lb) |
| Max Workpiece Length | 4,000 mm (157.5 in) |
| Max Workpiece Width | 3,700 mm (145.7 in) |
| Max Workpiece Height | 1,050 mm (41.3 in) |
The price estimate for the AWEA MEGA5 G4037 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-mega5-g4037#price; the request is passed to AWEA or an authorised dealer.
Both have 4,000 mm (157.5 in) of X travel and the HSK-A100 12,000 rpm spindle. The MEGA5 P4032 is a fixed bridge with 3,200 mm (126.0 in) of Y and a 4,020 x 2,400 mm (158.3 x 94.5 in) table rated for 15,000 kg (33,069 lb). The G4037 moves the gantry instead, reaches 3,700 mm (145.7 in) in Y over a 4,000 x 3,800 mm (157.5 x 149.6 in) table and rates the load per area at 2,500 kg/m². It suits parts too wide or too heavy for the bridge machine.
AWEA lists ± 0.010 mm positioning over full travel and ± 0.003 mm repeatability under JIS. Under VDI the figures are P = 0.025 mm over full travel and Ps = 0.018 mm. The X axis uses a rack and pinion drive with dual servo motors and dual linear scales, and the head carries absolute encoders as standard equipment.
Two B and C axis heads with direct drive motors. The TCH-30F is the high torque head; AWEA states 314 Nm at 1,540 rpm for it, and the specification table is written for this head at 12,000 rpm with HSK-A100. The TCH-20F is the compact head with a 55 kW motor and up to 24,000 rpm. A hydraulic clamping system locks the axes for cutting at fixed angles.
With the TCH-30F head the spindle nose to table distance is 200 ~ 1,400 mm, or 200 ~ 1,600 mm with the optional 1,400 mm Z travel. With the TCH-20F it is 355 ~ 1,555 mm. The distance between columns is 4,800 mm (189.0 in), and the listed maximum workpiece height is 1,050 mm (41.3 in).
