The AWEA VP-5012HS is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5000 x 1200 x 760 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-5012HS: 5,000 x 1,200 x 760 mm bridge mill, 8,000 kg table load, 10,000 rpm direct-driven BBT50 spindle, 8 m/min X feed, 28,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 1,200 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (Opt. BBT40) |
| Table / Platter / Chuck Size | 5,000 x 1,100 mm (196.9 x 43.3 in) |
| Max Table Load Capacity | 8,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 28,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 1,200 mm (47.2 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 5,000 x 1,100 mm (196.9 x 43.3 in) |
| Max Table Load | 8,000 kg (17,637 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 1,300 mm (51.2 in) |
| Spindle Taper | BBT50 (Opt. BBT40) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Max Spindle Speed | Direct-driven spindle 10,000 rpm |
| Rapid Traverse X | 8 m/min (315 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 8 m/min (315 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.04 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.03 mm |
| Power Requirement | AC 220 ± 10 % 3 , 60 / 50 Hz / 40 kVA |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Lubrication Tank Capacity | 4.5 liter |
| Hydraulic Tank Capacity | 400 liter (1 HP) |
| Machine Weight | 28,000 kg (61,728 lb) |
The price estimate for the AWEA VP-5012HS is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-vp-5012hs#price; the request is passed to AWEA or an authorised dealer.
X rapid is 8 m/min (315 ipm). The VP-1612HS and VP-2012HS list 24 m/min (945 ipm), the VP-3012HS 20 m/min (787 ipm) and the VP-4012HS 10 m/min (394 ipm). Cutting feed here is 8 m/min (315 ipm) as well, so on this machine the rapid and the top programmed feed in X are the same number.
Measured the VDI way, the table gives positioning of P ≤ 0.04 mm over full travel and repeatability of Ps ≤ 0.03 mm. Measured the JIS way, it gives ± 0.010 mm over full travel and ± 0.003 mm. The VDI rows widen with every size step above the VP-3012HS; the JIS rows are printed the same for all five models.
Not within the VP-HS series, which ends at this model. The VP-6012 extends X to 6,000 mm (236.2 in) and is listed with a direct drive spindle of 10,000 rpm and 22 / 26 kW (29.5 / 34.9 hp), and its table load is 5,000 kg (11,023 lb), lower than the 8,000 kg (17,637 lb) here.
A foundation for 28,000 kg (61,728 lb) plus up to 8,000 kg (17,637 lb) on the table, an electrical supply of AC 220 ± 10 % at 60 / 50 Hz with 40 kVA, and air at 5 ~ 7 kg/cm². The hydraulic tank is listed at 400 liter (1 HP) and the lubrication tank at 4.5 liter.
