The Haas Automation TM-2 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TM-2 toolroom mill: 40 x 16 x 16 in (1,016 x 406 x 406 mm) travels, 57.8 x 10.5 in table, 4,000 rpm, 7.5 hp, 220 VAC single-phase option.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 57.8 × 10.5 in (1,467 × 267 mm) |
| Max Table Load Capacity | 350 kg |
| Approx. Machine Weight | 5,060 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 40 in (1,016 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 16 in (406 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4 in (102 mm) |
| Spindle Motor Power | 7.5 hp (5.6 kW) |
| Max Spindle Speed | 4,000 rpm |
| Spindle Torque | 33 ft-lbf @ 1,200 rpm (45 N·m @ 1,200 rpm) |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Table Size | 57.8 × 10.5 in (1,467 × 267 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4 in (102 mm) |
| T Slots | 3 |
| Max Table Load | 350 lb (159 kg) |
| Max Cutting Feedrate | 200 ipm (5.1 m/min) |
| Rapid Traverse | 200 ipm (5.1 m/min) |
| Max Thrust X | 2,000 lbf (8,896 N) |
| Max Thrust Y | 2,000 lbf (8,896 N) |
| Max Thrust Z | 2,000 lbf (8,896 N) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 127 × 78 × 100 in (323 × 198 × 254 cm) |
| Shipping Export Pallet | 127 × 78 × 100 in (323 × 198 × 254 cm) |
| Machine Weight | 5,060 lb (2,295 kg) |
Haas Automation publishes a list price of US$52,995 for the Haas TM-2 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tm-2#price; the request is passed to Haas Automation or an authorised dealer.
X travel is 40 in (1,016 mm), so a feature up to that length can be cut in one clamping. The table itself is 57.8 in (1,467 mm) long and can support a longer workpiece, which then has to be repositioned to reach the ends. Y and Z travels are 16 in (406 mm) each.
It can be. The 350 lb (159 kg) rating covers everything bolted to the table. With several vises or a full-length fixture plate, the workholding alone uses a large part of the allowance, so weigh the setup before planning heavy steel parts. The table is 10.5 in (267 mm) wide with 3 T-slots on 4 in (102 mm) centres.
The TM-2P adds 10 tools, a 6,000 rpm spindle and 400 ipm (10.2 m/min) feed and rapid on the same 40 × 16 × 16 in (1,016 × 406 × 406 mm) travels. The TM-2 runs at 4,000 rpm and 200 ipm (5.1 m/min) with no tool changer in its table. For multi-vise work with frequent tool changes, the TM-2P removes the manual changes; for occasional long parts, the TM-2 does the same cuts.
Haas's shipping data gives 5,060 lb (2,295 kg) on a pallet of 127 × 78 × 100 in (323 × 198 × 254 cm), for domestic and export shipment alike. These are shipping dimensions, so ask Haas for the installed layout drawing before marking out the floor.
Yes. A 220 VAC single-phase supply at 40 A is listed alongside 220 VAC three-phase at 25 A and 440 VAC three-phase at 13 A. Compressed air is needed as well, with a minimum pressure of 80 psi (5.5 bar).
