The Brother SPEEDIO R450X1N is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Brother CNC-C00. It offers working travels of 450 x 320 x 305 mm, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Brother SPEEDIO R450X1N: 2-pallet QT Table, 450 x 320 x 305 mm travel, 10,000 rpm BT30 spindle (16,000 optional), 14 or 22-tool turret, 50 m/min rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Brother (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Brother CNC-C00 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 450 mm |
| Y-Axis Travel | 320 mm |
| Z-Axis Travel | 305 mm |
| Spindle Taper Interface | BT30 (BIG-PLUS optional) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 450 mm (17.7 in) |
| Y Axis Travel | 320 mm (12.6 in) |
| Z Axis Travel | 305 mm (12.0 in) |
| Spindle Speed | 10,000 rpm (16,000 rpm optional) |
| Spindle Taper | BT30 (BIG-PLUS optional) |
| Tool Magazine | 14 or 22-position turret |
| Pallet Changer | 2-pallet QT Table (automatic) |
| Rapid Traverse | 50 m/min (1,969 ipm) all axes |
| Footprint | 1,400 x 2,654 mm (55.1 x 104.5 in) |
| Coolant Through Spindle | Optional |
| Low Bed Table | Optional |
| CNC Control | Brother CNC-C00 |
| Power Supply | 200/220V, 3-phase |
| Xyz | 50m/min×50m/min×50m/min |
According to secondary market equipment benchmarks for November 2026, the Brother SPEEDIO R450X1N is estimated between $45,000 and $80,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
It is an automatic two-pallet table. One pallet is in the machining area while the other is outside for unloading and loading, and the two swap at the end of the cycle. The spindle stops only for the exchange, not for the whole loading time.
The SPEEDIO R650X1N has 650 x 400 x 305 mm (25.6 x 15.7 x 12.0 in) of travel, a 7.5 kW (10 hp) spindle and 200 kg per face (441 lb) on its pallets. The R450X1N has 450 x 320 x 305 mm (17.7 x 12.6 x 12.0 in). Both use a 14 or 22-position turret and 50 m/min rapids.
The standard spindle runs to 10,000 rpm, with 16,000 rpm as an option. The taper is BT30, and BIG-PLUS dual-contact tooling is optional. Coolant through the spindle is also an option, worth specifying if the work includes deep holes.
A floor area of 1,400 x 2,654 mm (55.1 x 104.5 in) and a 200/220V, 3-phase supply. The table for this model does not list weight or air demand, so ask Brother for both before planning the foundation and compressor.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.