The Brother SPEEDIO S500X1N is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Brother CNC-C00. It offers working travels of 500 x 400 x 305 mm, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Brother SPEEDIO S500X1N: 500 × 400 × 305 mm travels, 16,000 rpm 5.5 kW BT30 spindle, 1.4 s chip-to-chip, 14 or 21-position turret magazine.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Brother (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Brother CNC-C00 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 500 mm |
| Y-Axis Travel | 400 mm |
| Z-Axis Travel | 305 mm |
| Spindle Motor Rating | 5.5 kW |
| Spindle Taper Interface | BT30 (BIG-PLUS optional) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 500 mm (19.7 in) |
| Y Axis Travel | 400 mm (15.7 in) |
| Z Axis Travel | 305 mm (12.0 in) |
| Spindle Speed | 16,000 rpm |
| Spindle Taper | BT30 (BIG-PLUS optional) |
| Spindle Motor Power | 5.5 kW (7.4 hp) |
| Tool Magazine | 14 or 21-position turret |
| Chip To Chip Time | 1.4 seconds |
| Rapid Traverse | 50 m/min (1,969 ipm) all axes |
| Table Load Capacity | 200 kg (441 lb) |
| CNC Control | Brother CNC-C00 |
| Power Supply | 200/220V, 3-phase |
| Xyz | 50m/min×50m/min×56m/min |
According to secondary market equipment benchmarks for November 2026, the Brother SPEEDIO S500X1N is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
X, Y and Z travels are 500 × 400 × 305 mm (19.7 × 15.7 × 12.0 in). The table carries up to 200 kg (441 lb). The table size itself is not in the listed figures, so ask Brother for the table drawing before designing fixtures that use the full X stroke.
A 16,000 rpm spindle rated 5.5 kW (7.4 hp) with a BT30 taper. BIG-PLUS dual-contact holders are listed as an option. The speed suits small cutters in aluminium and non-ferrous metals; the power rating keeps heavy steel roughing off this machine.
The rapid-traverse row gives 50 m/min (1,969 ipm) on all axes. A second row on the same table gives 50 × 50 × 56 m/min for X, Y and Z, which would put Z higher. Because the two rows disagree on Z, confirm the figure for the specific machine before using it in cycle-time estimates.
The SPEEDIO S700X1N extends X travel to 700 mm (27.6 in) on the same 400 mm (15.7 in) of Y and 305 mm (12.0 in) of Z, with the same 5.5 kW (7.4 hp) spindle rating and 200 kg (441 lb) table load. The SPEEDIO S700X1N runs 10,000 rpm as standard with 16,000 rpm as an option and lists a Z rapid of 48 m/min (1,890 ipm). The S500X1N lists 16,000 rpm in its table.
A turret-type magazine with 14 or 21 positions, holding BT30 tools. Chip-to-chip time is 1.4 seconds. On parts that call many small tools in sequence, that short change time is one of the main reasons to choose a machine of this type.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.