The Brother SPEEDIO S700X1N is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Brother CNC-C00. It offers working travels of 700 x 400 x 305 mm, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Brother SPEEDIO S700X1N: 700 × 400 × 305 mm travels, 10,000 rpm BT30 spindle (16,000 optional), 5.5 kW, 14 or 21-position turret, 1.4 s chip-to-chip.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Brother (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Brother CNC-C00 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 700 mm |
| Y-Axis Travel | 400 mm |
| Z-Axis Travel | 305 mm |
| Spindle Motor Rating | 5.5 kW |
| Spindle Taper Interface | BT30 (BIG-PLUS optional) |
| Rapid Traverse Rate | 50 m/min (1,969 ipm) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 700 mm (27.6 in) |
| Y Axis Travel | 400 mm (15.7 in) |
| Z Axis Travel | 305 mm (12.0 in) |
| Spindle Speed | 10,000 rpm (16,000 rpm optional) |
| Spindle Taper | BT30 (BIG-PLUS optional) |
| Spindle Motor Power | 5.5 kW (7.4 hp) |
| Tool Magazine | 14 or 21-position turret |
| Chip To Chip Time | 1.4 seconds |
| Rapid Traverse Xy | 50 m/min (1,969 ipm) |
| Rapid Traverse Z | 48 m/min (1,890 ipm) |
| Table Load Capacity | 200 kg (441 lb) |
| CNC Control | Brother CNC-C00 |
| Power Supply | 200/220V, 3-phase |
| Xyz | 50m/min×50m/min×56m/min |
According to secondary market equipment benchmarks for November 2026, the Brother SPEEDIO S700X1N is estimated between $52,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
Mainly in X travel and standard spindle speed. The S700X1N has 700 mm (27.6 in) of X and a 10,000 rpm standard spindle with 16,000 rpm optional. The SPEEDIO S500X1N has 500 mm (19.7 in) of X and lists 16,000 rpm, with rapids of 50 m/min (1,969 ipm) on all axes. Y, Z, spindle power and table load are the same on both: 400 mm (15.7 in), 305 mm (12.0 in), 5.5 kW (7.4 hp) and 200 kg (441 lb).
No. The listed standard spindle runs to 10,000 rpm and the 16,000 rpm spindle is an option. When looking at a used S700X1N, check which spindle is fitted, because it decides whether the machine suits small-tool aluminium work or general steel drilling and tapping.
The Z rapid row gives 48 m/min (1,890 ipm), while a combined axis-speed row on the same table reads 50 × 50 × 56 m/min. X and Y agree at 50 m/min (1,969 ipm) in both rows. Ask Brother which Z figure is correct before using it in a cycle-time quote.
BT30 tools in a turret magazine with 14 or 21 positions, and BIG-PLUS dual-contact holders are listed as an option. Chip-to-chip time is 1.4 seconds, which keeps tool changes from dominating cycles on parts that use many small tools.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.