The CHIRON 831 MT is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Siemens SINUMERIK 840D sl. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Chiron 831 MT: five-axis mill-turn with separate turning and milling spindles, listed for workpieces up to 400 mm (15.7 in) from bar or chuck.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | CHIRON (International) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Siemens SINUMERIK 840D sl |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 400 mm (15.7 in) |
| Axes | 5-axis simultaneous mill-turn |
| Spindle Configuration | Separate turning and milling spindles |
| Machining Type | Complete machining (mill-turn from bar or chuck) |
| Machine Design | STAMA heritage, rigid column architecture |
| Machine Bed | Cast iron |
| CNC Control | Siemens SINUMERIK 840D sl |
| Bar Stock | Bar stock and chuck work capable |
According to secondary market equipment benchmarks for November 2026, the CHIRON 831 MT is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
The listed maximum workpiece diameter is 400 mm (15.7 in). Workpiece length, weight and bar diameter are not given, so the diameter is the only limit that can be read from this page. Check length and weight before planning shaft-type or heavy chuck parts.
Yes, going by the listed figures. The spindle configuration is given as separate turning and milling spindles, and the machine is described as five-axis simultaneous mill-turn. Speed, power and tool interface are not given for either spindle.
The listed figures call it capable of both bar stock and chuck work, and give the machining type as complete machining from bar or chuck. The bar diameter is missing, so compare your stock sizes with a data sheet before counting on bar feed.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.