The Citizen Cincom A20-VII is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Cincom A20-VII Swiss-type lathe: 20 mm work, 200 mm with guide bushing or 55 mm without, 10,000 rpm, 21 tools, 8,000 rpm back spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Maximum Machining Diameter | 20 mm dia. |
| Maximum Machining Length Guide Bushing | 200 mm |
| Maximum Machining Length Guide Bushing Less | 2.5D(max. 55 mm) |
| Maximum Drilling Diameter For Main Spindle | 10 mm dia. |
| Maximum Tapping Diameter For Main Spindle Tap Die | M8 |
| Max Spindle Speed | max. 10,000 rpm |
| Maximum Drilling Diameter For Rotary Tool | 7 mm dia. |
| Maximum Tapping Diameter For Rotary Tool | M6 |
| Spindle Speed Of The Gang Rotary Tool | max. 6,000 rpm (rating4,800 rpm) |
| Maximum Chuck Diameter Of Back Spindle | 20 mm dia. |
| Maximum Protrusion Length Of The Back Spindle Workpiece | 50 mm |
| Maximum Drilling Diameter In Back Machining Process | 8 mm dia. |
| Maximum Tapping Diameter In Back Machining Process | M6 |
| Sub Spindle Speed | max. 8,000 rpm |
| Number Of Tools To Be Mounted | 21 |
| Tool Size Turning Tool | 12 mm Sq. (13 mm Sq., 16 mm Sq.) |
| Rapid Feed Rate X1 Axis | 18 m/min |
| Rapid Feed Rate X2 Axis | 32 m/min |
| Rapid Feed Rate Y Axis | 32 m/min |
| Rapid Feed Rate Z1 Axis | 32 m/min |
| Rapid Feed Rate Z2 Axis | 32 m/min |
| Motors For Spindle Drive | 2.2/3.7 kW |
| Motors For Tool Spindle Drive | 0.75 kW |
| Motors For Back Spindle Drive | 1.1/1.5 kW |
| Motors For Cutting Coolant Oil | 0.4 kW |
| Power Requirement | 7.1 kVA |
| Load Operation Average Power | 4.1 kVA |
| Center Height | 1,050 mm |
| Machine Weight | 2,200 kg |
According to secondary market equipment benchmarks for November 2026, the Citizen Cincom A20-VII is estimated between $41,500 and $82,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $643 / month.
Yes. Guide-bushless, the maximum machining length is 2.5D, max. 55 mm. With the guide bushing it is 200 mm. The guide-bushless mode suits short parts; the guide bushing is for long, slender work.
On the main spindle, drilling to 10 mm dia. and tapping to M8. Gang rotary tools drill to 7 mm dia. and tap to M6. In back machining, drilling to 8 mm dia. and tapping to M6.
It chucks work up to 20 mm dia. with up to 50 mm of protrusion, and runs to max. 8,000 rpm on a 1.1/1.5 kW motor. Back-end drilling goes to 8 mm dia. and tapping to M6.
The Cincom B12E-II runs to 12,000 rpm (R.G.B.8,000 rpm) and weighs 1,100 kg. The A20-VII runs to max. 10,000 rpm, handles 20 mm dia. work, carries 21 tools and weighs 2,200 kg.
Citizen gives a power requirement of 7.1 kVA, with 4.1 kVA average during load operation. The centre height is 1,050 mm, which the bar feeder must match, and the machine weighs 2,200 kg.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.