The Citizen Cincom B12-VII is an industrial-grade CNC Lathes & Turning Centers powered by the Mitsubishi Meldas (Citizen software). and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Cincom B12-VII Swiss-type lathe: 12 mm bar, 150 mm machining length, 15,000 rpm main and back spindles, LFV standard, 7 axes.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Mitsubishi Meldas (Citizen software) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 12 mm (0.472 in) |
| Max Machining Diameter | 12 mm (0.472 in) |
| Max Machining Length | 150 mm (5.91 in) |
| Main Spindle Speed | 15,000 RPM |
| Main Spindle Power | 1.5 / 2.2 kW (2 / 3 HP) |
| Back Spindle Speed | 15,000 RPM |
| Back Spindle Power | 0.75 / 1.5 kW (1 / 2 HP) |
| Number Of Axes | 7-axis simultaneous |
| Lfv Chip Breaking | Yes (standard) |
| Guide Bushing | Yes (standard configuration) |
| CNC Control | Mitsubishi Meldas (Citizen software) |
| Machine Weight | Approx. 1,500 kg (3,307 lbs) |
According to secondary market equipment benchmarks for November 2026, the Citizen Cincom B12-VII is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
Both the main and back spindles are listed at 15,000 RPM. The main spindle motor is 1.5 / 2.2 kW (2 / 3 HP) and the back spindle motor 0.75 / 1.5 kW (1 / 2 HP).
The listed figures give LFV chip breaking as standard. It helps on materials that form long, stringy chips. Check that it is enabled on any used machine before relying on it for unattended runs.
The Cincom B12E-II runs to 12,000 rpm (R.G.B.8,000 rpm) and weighs 1,100 kg. The B12-VII is listed with 15,000 RPM on both spindles and approx. 1,500 kg (3,307 lbs), with a back spindle and LFV standard.
The tool count, the driven-tool layout and the rapid rates, none of which are listed. Also confirm the Mitsubishi Meldas control and its Citizen software, and plan for approx. 1,500 kg (3,307 lbs).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.