The Citizen Miyano ABX-38 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Miyano ABX-38: 38 mm (1.50 in) bar, twin 6,000 RPM spindles, 5,000 RPM driven tools, FANUC control. Listed figures for an older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 38 mm (1.50 in) |
| Max Machining Diameter | 38 mm (1.50 in) |
| Max Machining Length | 200 mm (7.87 in) |
| Main Spindle Speed | 6,000 RPM |
| Main Spindle Power | 7.5 / 11 kW (10 / 15 HP) |
| Sub Spindle Speed | 6,000 RPM |
| Sub Spindle Power | 3.7 / 5.5 kW (5 / 7.4 HP) |
| Driven Tool Speed | 5,000 RPM |
| Driven Tool Power | 1.5 / 2.2 kW (2 / 3 HP) |
| Number Of Tool Positions | Up to 20 (configuration dependent) |
| Headstock Type | Sliding headstock |
| CNC Control | FANUC |
| Machine Weight | Approx. 3,500 kg (7,716 lbs) |
According to secondary market equipment benchmarks for November 2026, the Citizen Miyano ABX-38 is estimated between $36,000 and $74,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $558 / month.
Citizen's current product pages do not list it, so it may be an older model. The figures on this page are the listed ones and have not been checked against a Citizen page, so confirm the bar capacity, tool layout and spindle ratings on the machine itself.
The listed bar capacity and maximum machining diameter are both 38 mm (1.50 in), with a maximum machining length of 200 mm (7.87 in). For 51 mm (2.01 in) bar the current Miyano ABX-51SYY2 is the listed alternative.
The main spindle is listed at 7.5 / 11 kW (10 / 15 HP) and 6,000 RPM, the sub spindle at 3.7 / 5.5 kW (5 / 7.4 HP) and 6,000 RPM. Driven tools run to 5,000 RPM with a 1.5 / 2.2 kW (2 / 3 HP) motor.
The table lists up to 20 tool positions and says the number depends on configuration. On a used machine count the stations and the driven-tool holders actually fitted before planning a job around it.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.