The Citizen Miyano BNA-42CY5 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC FS.0i-TF PLUS. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Miyano BNA-42CY5 Y-axis lathe with tailstock: 42 mm diameter, 60 - 6,000 RPM, 12-station turret with 12 rotary tools, 70 mm Y travel.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC FS.0i-TF PLUS |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,430 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 42 mm (1.65 in) |
| Max Machining Length | 200 mm (300 mm) |
| Bar Capacity | 135 mm |
| Main Spindle Speed | 60 - 6,000 RPM |
| Main Spindle Power | 11.7/5.5/5.5 kW (15.7/7.4/7.4 hp) |
| Number Of Spindles | 1 |
| Controlled Axes | X1, Z1, Y1, C1, E1 |
| Turret Stations | 12 |
| Live Tool Stations | 12 |
| Y Axis Travel | 70 mm (+/-35 mm) |
| Rapid Traverse Xz | 20 m/min |
| Rapid Traverse Y | 12 m/min |
| Floor Space | 2,260 x 1,433 mm |
| Machine Weight | 3,430 kg |
| CNC Control | FANUC FS.0i-TF PLUS |
| Capacity | 135 mm |
| X Axis | 140 mm |
| Z Axis | 5 kN |
| Y Axis | 6.7 kN |
| Number Of Tool Posts | 1 |
| Type Of Tool Post | 12 ST. |
| Opposite Side Distance Of Tool Post | 300 mm |
| Max Turning Radius Of Tool Post | 505 mm dia. |
| Dimensions Of Tools Used | ⧄ 20 mm |
| Dimensions Of Tool Post Holes | 25 mm dia. |
| Number Of Installed Rotary Tools | Max. 12 |
| Type Of Rotary Tool Drive | Independent clutch drive |
| Rotating Speed Of Rotary Tools | 50 to 5,000 min⁻¹ |
| Machining Capacities | Drill |
| Tap | Max. M6 × 1 |
| Tailstock Travel Distance | 200 mm |
| Morse Taper Size | MT2 |
| Max Slide Thrust | 4.3 kN (at 3.4 MPa) |
| Min Slide Thrust | 0.57 kN (at 0.45 MPa) |
| Drive Method | Hydraulic |
| Sp2 | 5.5 / 3.7 kW (15 min / cont.) |
| Rotary Tools Motor | 2.8 / 1.0 kW |
| Coolant Pump Motor | 0.25 kW |
| High Pressure Coolant Motor | 1.1 / 0.75 kW (60 / 50 Hz) |
| Power Supply | AC 200 / 220 ±5% ~10%, 50 / 60 Hz ±1% |
| Power Supply Capacity | 16 kVA |
| Fuse Capacity On Facilities Side | 75 A |
| Hydraulic Tank Capacity | 18 L |
| Lubricating Oil Tank Capacity | 2 L |
| Coolant Tank Capacity | 225 L |
| Machine Height | 1,745 mm |
| Required Floor Surface Area | W 2,260 × D 1,433 mm |
According to secondary market equipment benchmarks for November 2026, the Citizen Miyano BNA-42CY5 is estimated between $40,500 and $81,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $628 / month.
The Miyano BNA-42SY5 has a sub-spindle with a 4-inch chuck for back-side work and weighs 3,650 kg (8,047 lb). The Miyano BNA-42CY5 has one spindle and a hydraulic tailstock instead, weighs 3,430 kg and runs a FANUC FS.0i-TF PLUS control.
200 mm of travel, an MT2 taper and hydraulic drive. Slide thrust is listed from 0.57 kN at 0.45 MPa up to 4.3 kN at 3.4 MPa, so the support force can be set low for slender parts and higher for heavier cuts.
Up to 12, one in each turret station, with independent clutch drive at 50 to 5,000 min⁻¹ from a 2.8 / 1.0 kW motor. With 70 mm of Y travel (+/-35 mm) they can work off the spindle centreline.
An AC 200 / 220 supply rated 16 kVA with a 75 A fuse on the facilities side, and 0.5 MPa of air. Tanks take 225 L of coolant, 18 L of hydraulic oil and 2 L of lubricant.
It needs W 2,260 × D 1,433 mm of floor, stands 1,745 mm high and weighs 3,430 kg. Allow working space around that for the operator, chip handling and coolant service.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.