The Citizen Miyano LX-06E is an industrial-grade CNC Lathes & Turning Centers powered by the Mitsubishi M80 (Citizen Miyano). and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Miyano LX-06E compact chucking lathe: 8-station turret, 25 mm tools, MT.3 tailstock with 4.9 kN thrust, 150 x 300 mm strokes, 2,820 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Mitsubishi M80 (Citizen Miyano) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 150 mm (5.9 in) |
| Max Turning Length | 100 mm (3.94 in) |
| Main Spindle Speed | 4,500 RPM |
| Spindle Motor | 3.7 kW (5 hp) |
| Number Of Axes | 2 (X, Z) |
| Turret Positions | 8 |
| Chuck Size | 6 inch |
| Rapid Traverse X | 15 m/min |
| Rapid Traverse Z | 20 m/min |
| CNC Control | Mitsubishi M80 (Citizen Miyano) |
| Items | LX-06E3 |
| Power Chuck Size | 8" hydraulic drive |
| Maximum Diameter Of Collet Chuck | Stationary/Draw type |
| Maximum Machining Diameter | 210mm Dia. |
| Maximum Machining Length | Limited by tail-stock |
| Spindle Speed Range | 40~4,000min-1 |
| Spindle Motor Power | AC 11/7.5kW |
| Type Of Turret | 8St.Turret |
| Shank Height Of Square Turning Tool | 25mm Sq. |
| Tool Hole Diameter | 40mm Dia. |
| Z Axis | 300mm |
| Turret Indexing Time | 0.25sec./1pos. |
| Live Center Size | MT.3 |
| Tail Stock Slide Maximum Thrust Force | 4.9kN/1.9Mpa |
| Quill Travel | 100 |
| Tail Stock Slide Travel | 185 |
| Floor Space | 1,620×1,480mm |
| Maximum Diameter Of Collet Chuck Stationary Draw Type | 51mm Dia./51mm Dia. |
| Maximum Machining Length Limited By Tail Stock | 220mm |
| Slide Stroke X Axis | 150mm |
| Slide Stroke Z Axis | 300mm |
| Machine Weight Approx | 2,820kg |
According to secondary market equipment benchmarks for November 2026, the Citizen Miyano LX-06E is estimated between $42,500 and $84,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.
The table on this page holds two different sets of figures for the spindle speed, the motor rating, the chuck size and the maximum diameter. Read them from the machine's nameplate and documentation; on a used LX-06E those figures depend on the generation.
The turret has 8 stations and indexes in 0.25 sec per position. OD tools have 25 mm square shanks and boring bars or drills fit 40 mm diameter tool holes.
Yes. It takes an MT.3 live center, and the tailstock slide has a maximum thrust of 4.9 kN. Combined with the 300 mm Z stroke, that allows shafts and pins to be turned between chuck and centre.
It needs 1,620×1,480 mm of floor space and weighs approx. 2,820 kg. The slide strokes are 150 mm in X and 300 mm in Z, and the control is listed as a Mitsubishi M80.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.