The Citizen Miyano LX-08E is an industrial-grade CNC Lathes & Turning Centers powered by the Mitsubishi M80 (Citizen Miyano). and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Miyano LX-08E two-axis chucking lathe: 8" hydraulic chuck, 40 to 4,000 min-1 spindle, MT.3 tailstock, 220mm machining length, 2,820kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Mitsubishi M80 (Citizen Miyano) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 200 mm (7.87 in) |
| Max Turning Length | 150 mm (5.91 in) |
| Main Spindle Speed | 4,000 RPM |
| Spindle Motor | 5.5 kW (7.5 hp) |
| Number Of Axes | 2 (X, Z) |
| Turret Positions | 10 |
| Chuck Size | 8 inch |
| Rapid Traverse X | 15 m/min |
| Rapid Traverse Z | 20 m/min |
| CNC Control | Mitsubishi M80 (Citizen Miyano) |
| Items | LX-06E3 |
| Power Chuck Size | 8" hydraulic drive |
| Maximum Diameter Of Collet Chuck | Stationary/Draw type |
| Maximum Machining Diameter | 210mm Dia. |
| Maximum Machining Length | Limited by tail-stock |
| Spindle Speed Range | 40~4,000min-1 |
| Spindle Motor Power | AC 11/7.5kW |
| Type Of Turret | 8St.Turret |
| Shank Height Of Square Turning Tool | 25mm Sq. |
| Tool Hole Diameter | 40mm Dia. |
| Z Axis | 300mm |
| Turret Indexing Time | 0.25sec./1pos. |
| Live Center Size | MT.3 |
| Tail Stock Slide Maximum Thrust Force | 4.9kN/1.9Mpa |
| Quill Travel | 100 |
| Tail Stock Slide Travel | 185 |
| Floor Space | 1,620×1,480mm |
| Maximum Diameter Of Collet Chuck Stationary Draw Type | 51mm Dia./51mm Dia. |
| Maximum Machining Length Limited By Tail Stock | 220mm |
| Slide Stroke X Axis | 150mm |
| Slide Stroke Z Axis | 300mm |
| Machine Weight Approx | 2,820kg |
According to secondary market equipment benchmarks for November 2026, the Citizen Miyano LX-08E is estimated between $41,500 and $82,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $643 / month.
The Miyano LX-08E takes an 8 inch chuck and the Miyano LX-06E a 6 inch chuck. Both are listed with rapids of 15 m/min on X and 20 m/min on Z and with a Mitsubishi M80 control.
Yes. It takes an MT.3 live center and the tailstock slide is rated at 4.9kN/1.9Mpa of thrust. With the tailstock in place the machining length is listed to 220mm, so shafts can be turned between the chuck and the center.
The table lists collet chucks to 51mm Dia. in both the stationary and the draw type, alongside the 8" hydraulic power chuck. Check how a given machine is equipped before planning bar or collet jobs on it.
Square turning tools with 25mm Sq. shanks and boring tools in 40mm Dia. holes. The turret indexes in 0.25sec./1pos., and the slides travel 150mm on X and 300mm on Z at rapids of 15 m/min and 20 m/min.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.