The Citizen Miyano VC03 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Citizen Miyano CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Miyano VC03 two-axis autoloading lathe: 8,000 RPM spindle, X 180 mm / Z 200 mm travel, 40 mm part length with loader, 5 tools, 1,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Citizen Miyano CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 180 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 200 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Work Diameter | Pull type collet chuck |
| Max Machining Length | 50 mm (1.97 in) |
| Max Work Length With Loader | 40 mm (1.57 in) |
| Main Spindle Speed | 8,000 RPM |
| Spindle Motor | 3.7 / 2.2 kW (5 / 3 HP) |
| Number Of Axes | 2 (X, Z) |
| Tool Positions | 5 (horizontal linear platen) |
| X Axis Travel | 180 mm (7.09 in) |
| Z Axis Travel | 200 mm (7.87 in) |
| Rapid Traverse X | 20 m/min |
| Rapid Traverse Z | 30 m/min |
| Lfv Technology | Yes (Low Frequency Vibration cutting) |
| Collet Through Hole | 17 mm (0.67 in) |
| Machine Weight | 1,500 kg (3,307 lb) |
| Power Requirement | 11 kVA |
| CNC Control | Citizen Miyano CNC |
| Slide Travel | X-axis |
| Rapid Feed Rate | X-axis |
| Shank Size Of Square Turning Tool | 10, 12, (16) mm sq. |
| Tool Capacity | Standard |
| Spindle Drive | 15 min./ Cont. |
| Tank Capacity | Oil Viscosity VG32 |
According to secondary market equipment benchmarks for November 2026, the Citizen Miyano VC03 is estimated between $44,500 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
No. The listed figures describe a two-axis (X, Z) lathe with a pull-type collet chuck, an 8,000 RPM spindle, five tool positions on a horizontal linear platen and a loader.
Machining length is up to 50 mm (1.97 in), or 40 mm (1.57 in) with the loader. The collet through-hole is 17 mm (0.67 in). The table does not give a maximum work diameter as a figure, so check the collet range of the machine you are considering.
X travel is 180 mm (7.09 in) and Z travel 200 mm (7.87 in). Rapids are 20 m/min on X and 30 m/min on Z, which keeps non-cutting time short on parts with a few quick operations.
Five tools on a horizontal linear platen, with square turning tool shanks of 10 or 12 mm sq. and 16 mm sq. shown in brackets as the alternative. There are no driven tools listed, so cross holes and flats need another machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.