The Citizen Cincom L32-XII ATC is an industrial-grade CNC Lathes & Turning Centers powered by the Mitsubishi Meldas (Citizen software). a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Cincom L32-XII ATC: 32 mm Swiss-type lathe with 13-tool ATC at 12,000 rpm, B-axis, 8,000 rpm main spindle. Not in the current lineup.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Mitsubishi Meldas (Citizen software) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 32 mm (1.26 in) |
| Max Machining Diameter | 32 mm (1.26 in) |
| Max Machining Length | 200 mm (7.87 in) |
| Main Spindle Speed | 8,000 RPM |
| Main Spindle Power | 3.7 / 5.5 / 7.5 kW (5 / 7.4 / 10 HP) |
| Back Spindle Speed | 10,000 RPM |
| Back Spindle Power | 1.5 / 2.2 / 3.7 kW (2 / 3 / 5 HP) |
| Spindle Bore | 38 mm (1.50 in) |
| Number Of Axes | 12-axis + programmable B-axis |
| Number Of Tools | 34 main + 13 ATC |
| Rapid Traverse | 32 m/min |
| Guide Bushing | Yes / Guide-bushless option |
| Lfv Chip Breaking | Yes (simultaneous dual-spindle) |
| Power Consumption | 9.5 kVA rated / 5.0 kVA average |
| Machine Dimensions | 2,450 x 1,650 x 1,850 mm (96.5 x 65 x 72.8 in) |
| Machine Weight | 2,900 kg (6,393 lbs) |
| CNC Control | Mitsubishi Meldas (Citizen software) |
| Atc Spindle Speed | 12,000 RPM |
| Atc Motor | 2.2 kW |
| Atc Tool Holder | JBS-15T |
| Atc Collet | ER16 |
| Atc Max Tool Od | 30 mm |
| Tool Change Time | 4.0 sec |
| Max Front Drilling Diameter | 12 mm Dia. |
| Max Front Tapping Diameter | M12 |
| Spindle Through Hole Diameter | 39 mm Dia. |
| Max Chuck Diameter Of The Back Spindle | 32 mm Dia. |
| Max Protrusion Length Of The Back Spindle Workpiece | 80 mm |
| Max Protrusion Length | 150 mm |
| Max Drilling Diameter For The Back Spindle | 10 mm Dia. |
| Max Tapping Diameter For The Back Spindle | M10 |
| Gang Rotary Tool | 4 – 6 |
| Max Tapping Diameter | M6 |
| Max Spindle Speed | Max. 6,000 min⁻¹ (Rating: 3,000 min⁻¹) |
| Front Rotary Tool 2 | Max. drilling diameter |
| Number Of Tools To Be Mounted Max | 19 – 30 |
| Gang Turning Tool | 6 |
| Front Drilling Tool | 4 – 9 |
| Tool Size | Gang turning tool |
| Sleeve | 25.4 mm Dia. |
| Chuck And Bushing | Main spindle collet chuck |
| Rotary Tool Collet Chuck | ER11, ER16 |
| Chuck For Drill Sleeves | ER11, ER16 |
| Rapid Feed Rate | All axes (except Y2) |
| Motors | Spindle drive |
| Gang Tool Post Rotary Tool Drive | 1.0 kW |
| Front Rotary Tool Drive 2 | 1.0 kW |
| Coolant Oil | 0.4 kW |
| Lubricating Oil | 0.003 kW |
| Rated Power Consumption | 13.2 KVA |
| Full Load Current | 36 A |
| Main Breaker Capacity | 60 A |
| Air Pressure And Air Flow Rate For Pneumatic Devices | 0.5 MPa, 64.2 NL/min |
| Centre Height | 1,050 mm |
Our best estimate for the Citizen Cincom L32-XII ATC is $320,000 - $450,000. This is an estimate for a swiss-type lathes in this class, not a quote from Citizen Machinery; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/citizen-cincom-l32-xii-atc#price; the request is passed to Citizen Machinery or an authorised dealer.
The listed figures give 13 ATC tools in JBS-15T holders with ER16 collets, a maximum tool outside diameter of 30 mm, a 12,000 rpm tooling spindle on a 2.2 kW motor and a tool change time of 4.0 sec.
No. It is not in Citizen's current lineup, and no current Citizen product page carries its table, so its figures cannot be confirmed against the manufacturer. Several of the listed rows also conflict with each other.
Bar capacity is 32 mm and the main spindle runs to 8,000 rpm. The back spindle chuck takes 32 mm, drills up to 10 mm and taps up to M10, with up to 80 mm of the workpiece protruding for back machining.
The spindle bore, the number of mountable tools and the power consumption, because each is listed with two values. The listed electrical figures include a 60 A main breaker and the air supply is given as 0.5 MPa.
