The Dener DDS-4013 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener DDS-4013 ball screw press brake: 40 ton over 1,300 mm, 20 mm/sec bending, 150 mm stroke, 375 mm daylight, 2x3.8 kW, 3,400 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 1,300 mm (51.2 in) |
| Bending Capacity | 40 ton |
| Daylight | 375 mm (14.8 in) |
| Stroke | 150 mm (5.9 in) |
| Approach Speed | 120 mm/sec |
| Bending Speed | 20 mm/sec |
| Return Speed | 120 mm/sec |
| Motor Power | 2x3.8 kW |
| Machine Weight | 3,400 kg (7,496 lb) |
| Machine Length | 1,880 mm (74 in) |
| Machine Width | 2,435 mm (95.9 in) |
| Machine Height | 2,320 mm (91.3 in) |
According to secondary market equipment benchmarks for November 2026, the Dener DDS-4013 is estimated between $46,000 and $82,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $713 / month.
The ram is driven by servo motors through ball screws instead of hydraulic cylinders. Dener describes the series as 100% electric with 0% hydraulic oil. This model is rated at 40 ton over 1,300 mm.
Daylight is 375 mm and the maximum stroke is 150 mm. The DDS40130-570-DL has the same force and length with 570 mm of daylight.
According to secondary market equipment benchmarks for November 2026, the Dener DDS-4013 is estimated between $46,000 and $82,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $713 / month.
An ESA S 640 control unit is standard. The ESA S 875 W and the Delem DA 66T and DA 69T 3D controls are available as optional equipment.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.