The Dener TMC 1600 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 1600 x 700 x 700 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TMC 1600 vertical machining center: 1,600 x 700 x 700 mm travels, 1,750 x 700 mm table, 11/30 kW BBT 40 spindle, 1,200 kg load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,600 mm |
| Y-Axis Travel | 700 mm |
| Z-Axis Travel | 700 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | BBT 40 |
| Table / Platter / Chuck Size | 1,750 x 700 mm |
| Max Table Load Capacity | 1,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xyz | 36/36/36 m/min |
| Cutting Feed Rate | 1~15 m/min |
| X Axis Travel | 1,600 mm (63 in) |
| Y Axis Travel | 700 mm (27.6 in) |
| Z Axis Travel | 700 mm (27.6 in) |
| Table Size | 1,750 x 700 mm |
| Max Table Load | 1,200 kg (2,646 lb) |
| Spindle Taper | BBT 40 |
| Max Spindle Speed | 10,000 rpm |
| Spindle Motor Power | 11/30 kW |
| Spindle Torque | 77.8/191 Nm |
| Axis Motor Power Xyz | 3.5/3.5/4.5 kW |
According to secondary market equipment benchmarks for November 2026, the Dener TMC 1600 is estimated between $79,500 and $142,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,232 / month.
Axis travels are 1,600 mm in X, 700 mm in Y and 700 mm in Z, with a 1,750 x 700 mm table rated at 1,200 kg (2,646 lb).
No. Both list a BBT 40 spindle at 10,000 rpm with 11/30 kW of motor power and 77.8/191 Nm of torque. Only the X travel and table differ.
The table lists axis motor powers of 3.5/3.5/4.5 kW for X, Y and Z. Rapid traverse is 36 m/min on each axis, with cutting feeds of 1~15 m/min.
A Mitsubishi M80A-8A control with Navi-Mill, a 24-tool arm-type ATC, a fully enclosed cabin, a steel belt chip conveyor, automatic lubrication and rigid tapping.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.