The Dener TMC 850 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 850 x 510 x 560 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TMC 850 vertical machining center: 850 x 510 x 560 mm travels, BBT 40, 10,000 rpm, 36 m/min rapids, 500 kg table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 850 mm |
| Y-Axis Travel | 510 mm |
| Z-Axis Travel | 560 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | BBT 40 |
| Table / Platter / Chuck Size | 1,000 x 500 mm |
| Max Table Load Capacity | 500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xyz | 36/36/36 m/min |
| Cutting Feed Rate | 1~15 m/min |
| X Axis Travel | 850 mm (33.5 in) |
| Y Axis Travel | 510 mm (20.1 in) |
| Z Axis Travel | 560 mm (22 in) |
| Table Size | 1,000 x 500 mm |
| Max Table Load | 500 kg (1,102 lb) |
| Spindle Taper | BBT 40 |
| Max Spindle Speed | 10,000 rpm |
| Spindle Motor Power | 7.5/18 kW |
| Spindle Torque | 47.7/115 Nm |
| Axis Motor Power Xyz | 2.2/2.2/3.5 kW |
According to secondary market equipment benchmarks for November 2026, the Dener TMC 850 is estimated between $46,500 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
850 mm in X, 510 mm in Y and 560 mm in Z. The table measures 1,000 x 500 mm and carries up to 500 kg (1,102 lb).
A BBT 40 direct-drive spindle running to 10,000 rpm, with motor power listed as 7.5/18 kW and torque as 47.7/115 Nm. Dener lists faster direct-drive spindles as optional equipment.
A Mitsubishi M80A-8A with conversational programming (Navi-Mill) is standard. A FANUC 0i MF is listed as an option.
No. Coolant through nozzles around the spindle is standard, while through-tool coolant at 30 bar is on the optional equipment list, along with tool and workpiece measuring systems.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.