The Dener TTC-6 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TTC-6 CNC lathe: 6 inch chuck, 6,000 rpm, 305 mm turning diameter, 433 mm machining length, 45 mm bar capacity, FANUC 0İ TFP.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~5 m/min |
| Swing Diameter | 560 mm (22 in) |
| Max Turning Diameter | 305 mm (12 in) |
| Max Turning Length | 433 mm (17 in) |
| Chuck Size | 6 inch (152 mm) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Motor Power | 11/20.4 kW |
| Spindle Bore | 56 mm (2.2 in) |
| Bar Capacity | 45 mm (1.8 in) |
According to secondary market equipment benchmarks for November 2026, the Dener TTC-6 is estimated between $42,000 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $651 / month.
The maximum turning diameter is 305 mm (12 in) and the machining length 433 mm (17 in), under a swing diameter of 560 mm (22 in). The chuck is 6 inch (152 mm) and bar up to 45 mm (1.8 in) passes through the spindle.
The TTC-8 carries an 8 inch (203 mm) chuck, a 66 mm (2.6 in) spindle bore and 52 mm (2 in) of bar capacity, and its spindle speed is 4,500 rpm. The TTC-6 has the smaller chuck and bore but runs to 6,000 rpm and has a slightly longer machining length.
FANUC 0İ TFP is listed under standard equipment. Mitsubishi M80A-8A appears in the optional equipment list, so the control is a choice to make when ordering.
Dener prints a second column headed TTC-6(C) beside this model. It differs in two rows only: the TTC-6(C) lists a maximum turning diameter of 275 mm (10.8 in) and a machining length of 362 mm (14.3 in). The page does not explain the designation.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.