The Dener TTH-12(C) is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,450 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TTH-12(C) CNC lathe: 373 mm turning diameter, 537 mm machining length, 12 inch chuck, 118 mm bore, 95 mm bar capacity, 2,450 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,450 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~10 m/min |
| Swing Diameter | 650 mm (25.6 in) |
| Max Turning Diameter | 373 mm (14.7 in) |
| Max Turning Length | 537 mm (21.1 in) |
| Chuck Size | 12 inch (305 mm) |
| Max Spindle Speed | 2,450 rpm |
| Spindle Motor Power | 15/20.4 kW |
| Spindle Bore | 118 mm (4.6 in) |
| Bar Capacity | 95 mm (3.7 in) |
According to secondary market equipment benchmarks for November 2026, the Dener TTH-12(C) is estimated between $38,000 and $77,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $589 / month.
According to secondary market equipment benchmarks for November 2026, the Dener TTH-12(C) is estimated between $38,000 and $77,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $589 / month.
Yes. The spindle bore diameter is 118 mm (4.6 in) and the bar capacity 95 mm (3.7 in), identical to the base model, with a 12 inch (305 mm) chuck and a speed of 2,450 rpm.
First, what the (C) column represents, since the page does not say. Second, whether the largest part and its chuck jaws clear the 373 mm (14.7 in) turning diameter. Third, the tailstock, which is listed as a programmable option.
Rapid traverse is printed as 30/30 m/min for X/Z and the cutting feed rate as 1~10 m/min. Both rows are identical across the TTH models and their (C) columns.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.