The Dener XL 1560 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 1560 hydraulic press brake: 60 ton over 1,550 mm, 180 mm/sec approach, 220 mm stroke, 410 mm daylight, 7.5 kW motor, 4,300 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,300 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 1,550 mm (61 in) |
| Bending Capacity | 60 ton |
| Approach Speed | 180 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 160 mm/sec |
| Stroke | 220 mm (8.7 in) |
| Daylight | 410 mm (16.1 in) |
| Throat Depth | 400 mm (15.7 in) |
| Distance Between Side Frames | 1,250 mm (49.2 in) |
| Machine Length | 2,445 mm (96.3 in) |
| Machine Width | 2,200 mm (86.6 in) |
| Width Without Front Support | 1,635 mm (64.4 in) |
| Maximum Height | 2,390 mm (94.1 in) |
| Main Motor Power | 7.5 kW (10.1 hp) |
| Oil Tank | 100 lt |
| Machine Weight | 4,300 kg (9,480 lb) |
According to secondary market equipment benchmarks for November 2026, the Dener XL 1560 is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
It applies 60 ton over a bending length of 1,550 mm (61 in). The distance between the side frames is 1,250 mm, so a part wider than that has to fit within the 400 mm throat depth.
Approach speed is 180 mm/sec, bending speed 10 mm/sec and return speed 160 mm/sec. With only 220 mm of stroke to cover, the ram spends little of each cycle travelling.
Dener lists a 15-inch ESA 640 2D control unit as standard for the series. An ESA 875 W 3D control and Delem 66T or 69T controls are listed as optional equipment.
According to secondary market equipment benchmarks for November 2026, the Dener XL 1560 is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.