The Dener XL 30175 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 30175 hydraulic press brake: 175 ton over 3,020 mm, 350 mm stroke, 600 mm daylight, 22 kW motor, 11,600 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 11,600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,020 mm (118.9 in) |
| Bending Capacity | 175 ton |
| Approach Speed | 150 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 130 mm/sec |
| Stroke | 350 mm (13.8 in) |
| Daylight | 600 mm (23.6 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 2,555 mm (100.6 in) |
| Machine Length | 3,745 mm (147.4 in) |
| Machine Width | 2,280 mm (89.8 in) |
| Width Without Front Support | 1,720 mm (67.7 in) |
| Maximum Height | 3,030 mm (119.3 in) |
| Main Motor Power | 22 kW (29.5 hp) |
| Oil Tank | 300 lt |
| Machine Weight | 11,600 kg (25,573 lb) |
According to secondary market equipment benchmarks for November 2026, the Dener XL 30175 is estimated between $51,500 and $90,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $798 / month.
The XL 30135 has 135 ton, a 320 mm stroke, 550 mm daylight and weighs 9,600 kg; this model has 175 ton, a 350 mm stroke, 600 mm daylight, a 22 kW motor with a 300 lt tank, and weighs 11,600 kg.
The ram approaches at 150 mm/sec, bends at 10 mm/sec and returns at 130 mm/sec according to the specification table.
The table gives a maximum height of 3,030 mm, a length of 3,745 mm and a width without front supports of 1,720 mm. Ask Dener for the transport height, which the page does not state.
A hydraulic oil cooling system is listed as optional equipment for the XL series, as is an electrical cabinet cooling system. Neither is part of the standard machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.