The Dener XL 30220 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 30220 hydraulic press brake: 220 ton over 3,020 mm, 350 mm stroke, 600 mm daylight, 140 mm/sec approach, 11,800 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 11,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,020 mm (118.9 in) |
| Bending Capacity | 220 ton |
| Approach Speed | 140 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 130 mm/sec |
| Stroke | 350 mm (13.8 in) |
| Daylight | 600 mm (23.6 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 2,555 mm (100.6 in) |
| Machine Length | 3,745 mm (147.4 in) |
| Machine Width | 2,290 mm (90.2 in) |
| Width Without Front Support | 1,720 mm (67.7 in) |
| Maximum Height | 3,055 mm (120.3 in) |
| Main Motor Power | 22 kW (29.5 hp) |
| Oil Tank | 300 lt |
| Machine Weight | 11,800 kg (26,014 lb) |
According to secondary market equipment benchmarks for November 2026, the Dener XL 30220 is estimated between $52,000 and $91,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $806 / month.
According to secondary market equipment benchmarks for November 2026, the Dener XL 30220 is estimated between $52,000 and $91,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $806 / month.
Force and approach speed. The XL 30175 is rated at 175 ton and approaches at 150 mm/sec; the XL 30220 is rated at 220 ton and approaches at 140 mm/sec. Stroke, daylight, throat, motor and tank are the same.
It comes with a manual lower table crowning system. Dener offers a motorized crowning system as an option, which is worth considering when jobs of different thickness alternate on a 3,020 mm bed.
Length 3,745 mm, width 2,290 mm with front supports, 1,720 mm without, maximum height 3,055 mm. The machine weighs 11,800 kg (26,014 lb) and holds 300 lt of oil.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.