The Dener XL 40320 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 40320 hydraulic press brake: 320 ton over 4,050 mm, 400 mm stroke, 650 mm daylight, 30 kW main motor, 17,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 17,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,050 mm (159.4 in) |
| Bending Capacity | 320 ton |
| Approach Speed | 125 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 120 mm/sec |
| Stroke | 400 mm (15.7 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 3,550 mm (139.8 in) |
| Machine Length | 4,780 mm (188.2 in) |
| Machine Width | 2,290 mm (90.2 in) |
| Width Without Front Support | 1,760 mm (69.3 in) |
| Maximum Height | 3,100 mm (122 in) |
| Main Motor Power | 30 kW (40.2 hp) |
| Oil Tank | 400 lt |
| Machine Weight | 17,500 kg (38,580 lb) |
According to secondary market equipment benchmarks for November 2026, the Dener XL 40320 is estimated between $45,500 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
According to secondary market equipment benchmarks for November 2026, the Dener XL 40320 is estimated between $45,500 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
A 400 mm stroke and 650 mm daylight. Both exceed the 350 mm and 600 mm of the XL 40220, which helps with the tall tooling used on thick material.
It weighs 17,500 kg (38,580 lb), is 4,780 mm long and up to 3,100 mm high. The main motor is 30 kW (40.2 hp); voltage is not stated in the table.
No. A hydraulic oil cooling system appears under optional equipment for the XL series. The oil tank itself holds 400 lt on this model.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.