The Dener XL 40400 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 40400 hydraulic press brake: 400 ton over 4,050 mm, 600 mm throat depth, 650 mm daylight, 37 kW main motor, 25,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 25,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,050 mm (159.4 in) |
| Bending Capacity | 400 ton |
| Approach Speed | 80 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 80 mm/sec |
| Stroke | 400 mm (15.7 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 600 mm (23.6 in) |
| Distance Between Side Frames | 3,550 mm (139.8 in) |
| Machine Length | 5,000 mm (196.9 in) |
| Machine Width | 2,770 mm (109.1 in) |
| Width Without Front Support | 2,290 mm (90.2 in) |
| Maximum Height | 3,560 mm (140.2 in) |
| Main Motor Power | 37 kW (49.6 hp) |
| Oil Tank | 400 lt |
| Machine Weight | 25,000 kg (55,115 lb) |
According to secondary market equipment benchmarks for November 2026, the Dener XL 40400 is estimated between $45,500 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
Force and frame. The XL 40320 is a 320 ton machine with a 450 mm throat and weighs 17,500 kg. The XL 40400 has 400 ton, a 600 mm throat, a 37 kW motor and weighs 25,000 kg.
Approach speed and return speed are both 80 mm/sec, and bending speed is 10 mm/sec. The stroke is 400 mm, so a full open-and-close takes noticeably longer than on the lighter models.
5,000 mm long, 2,770 mm wide including the front supports, 2,290 mm wide without them, and 3,560 mm maximum height. Weight is 25,000 kg (55,115 lb).
The series standard is a 15-inch ESA 640 2D control unit. The 21-inch ESA 875 W 3D control and the Delem 66T and 69T units are optional.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.