The Dener XL 60600 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 60600 hydraulic press brake: 600 ton over 6,050 mm, 450 mm stroke, 680 mm daylight, 600 mm throat, 45 kW motor, 51,700 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 51,700 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 6,050 mm (238.2 in) |
| Bending Capacity | 600 ton |
| Approach Speed | 60 mm/sec |
| Return Speed | 60 mm/sec |
| Stroke | 450 mm (17.7 in) |
| Daylight | 680 mm (26.8 in) |
| Throat Depth | 600 mm (23.6 in) |
| Distance Between Side Frames | 5,100 mm (200.8 in) |
| Machine Length | 7,145 mm (281.3 in) |
| Machine Width | 3,275 mm (128.9 in) |
| Width Without Front Support | 2,800 mm (110.2 in) |
| Maximum Height | 3,910 mm (153.9 in) |
| Main Motor Power | 45 kW (60.3 hp) |
| Oil Tank | 600 lt |
| Machine Weight | 51,700 kg (113,977 lb) |
According to secondary market equipment benchmarks for November 2026, the Dener XL 60600 is estimated between $51,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
It is rated at 600 ton over a bending length of 6,050 mm (238.2 in), driven by a 45 kW (60.3 hp) main motor with a 600 lt oil tank.
A stroke of 450 mm, daylight of 680 mm and a throat depth of 600 mm. The XL 60400 below it has a 400 mm stroke and 650 mm daylight.
7,145 mm long, 3,275 mm wide with the front supports (2,800 mm without) and 3,910 mm high. The weight is 51,700 kg (113,977 lb).
The specification table gives 60 mm/sec for approach and return. The bending speed printed for this size does not fit the rest of the series, so it should be confirmed with Dener.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.