The Dener DDS-4013 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener DDS-4013 ball screw press brake: 40 ton over 1,300 mm, 20 mm/sec bending, 150 mm stroke, 375 mm daylight, 2x3.8 kW, 3,400 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 1,300 mm (51.2 in) |
| Bending Capacity | 40 ton |
| Daylight | 375 mm (14.8 in) |
| Stroke | 150 mm (5.9 in) |
| Approach Speed | 120 mm/sec |
| Bending Speed | 20 mm/sec |
| Return Speed | 120 mm/sec |
| Motor Power | 2x3.8 kW |
| Machine Weight | 3,400 kg (7,496 lb) |
| Machine Length | 1,880 mm (74 in) |
| Machine Width | 2,435 mm (95.9 in) |
| Machine Height | 2,320 mm (91.3 in) |
The price estimate for the Dener DDS-4013 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dener-dds-4013#price; the request is passed to Dener or an authorised dealer.
The ram is driven by servo motors through ball screws instead of hydraulic cylinders. Dener describes the series as 100% electric with 0% hydraulic oil. This model is rated at 40 ton over 1,300 mm.
Daylight is 375 mm and the maximum stroke is 150 mm. The DDS40130-570-DL has the same force and length with 570 mm of daylight.
Motor power is listed as 2x3.8 kW. The standard electrical system is 380 V, 50-60 Hz, 3-phase, with electrical cabinet cooling included.
An ESA S 640 control unit is standard. The ESA S 875 W and the Delem DA 66T and DA 69T 3D controls are available as optional equipment.
