The Dener XL 1560 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 1560 hydraulic press brake: 60 ton over 1,550 mm, 180 mm/sec approach, 220 mm stroke, 410 mm daylight, 7.5 kW motor, 4,300 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,300 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 1,550 mm (61 in) |
| Bending Capacity | 60 ton |
| Approach Speed | 180 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 160 mm/sec |
| Stroke | 220 mm (8.7 in) |
| Daylight | 410 mm (16.1 in) |
| Throat Depth | 400 mm (15.7 in) |
| Distance Between Side Frames | 1,250 mm (49.2 in) |
| Machine Length | 2,445 mm (96.3 in) |
| Machine Width | 2,200 mm (86.6 in) |
| Width Without Front Support | 1,635 mm (64.4 in) |
| Maximum Height | 2,390 mm (94.1 in) |
| Main Motor Power | 7.5 kW (10.1 hp) |
| Oil Tank | 100 lt |
| Machine Weight | 4,300 kg (9,480 lb) |
The price estimate for the Dener XL 1560 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dener-xl-1560#price; the request is passed to Dener or an authorised dealer.
It applies 60 ton over a bending length of 1,550 mm (61 in). The distance between the side frames is 1,250 mm, so a part wider than that has to fit within the 400 mm throat depth.
Approach speed is 180 mm/sec, bending speed 10 mm/sec and return speed 160 mm/sec. With only 220 mm of stroke to cover, the ram spends little of each cycle travelling.
Dener lists a 15-inch ESA 640 2D control unit as standard for the series. An ESA 875 W 3D control and Delem 66T or 69T controls are listed as optional equipment.
The table gives a length of 2,445 mm, a width of 2,200 mm with the front supports (1,635 mm without them) and a maximum height of 2,390 mm. The machine weighs 4,300 kg (9,480 lb).
